Lawnboy8445
New member
I know this is a tractor forum and this is not a tractor but can anyone help me ID this thing? All the markings are Japanese. (I think.) Any help is greatly appreciated. I been all over the internet with no luck. Thanks.
Buying Advice What make/model is this thing? Can anyone help?
- Thread starter Lawnboy8445
- Start date
- Views: 2630
OP
Lawnboy8445
New member
L
Ok. I'll get some more pics tomorrow. The only stickers on the machine appear to be warning/caution labels. I'll submit tomorrow. Thanks.
Ok. I'll get some more pics tomorrow. The only stickers on the machine appear to be warning/caution labels. I'll submit tomorrow. Thanks.
OP
Lawnboy8445
New member
Here are the pics of the stickers on the machine.
Attachments
dave1949
Super Star Member
Could be useful info on the engine. Maker, serial number, etc. that would offer a clue.
mguitas
Super Member
- Joined
- Aug 22, 2011
- Messages
- 8,080
- Location
- Schuylkill County Pennsylvania
- Tractor
- Massey Ferguson 1423 Hydrostat
I know someone at work who could translate this. But by then you might have the answer.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,895
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
It looks like a Kubota Tracked Dumper
Here is what might be a newer version:
Kubota KC50L / KC121 Tracked Dumper Construction brochure 1996 | eBay
Here is what might be a newer version:
Kubota KC50L / KC121 Tracked Dumper Construction brochure 1996 | eBay
Last edited:
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,895
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Another similar model.
Yours probably dumps to either side also.
Yours probably dumps to either side also.
OP
Lawnboy8445
New member
No markings at all on the engine. I'm almost sure it's a honda. 2:1 gear reduction. Motor actually turns counterclockwise when viewed from the flywheel side. 
the bed only hinges in the front. It is not hydraulic. It has a transmission with drum brakes on each output shaft to steer it. It's a manual dump. No cylinder.
the bed only hinges in the front. It is not hydraulic. It has a transmission with drum brakes on each output shaft to steer it. It's a manual dump. No cylinder.
OP
Lawnboy8445
New member
No markings at all on the engine. I'm almost sure it's a honda. 2:1 gear reduction. Motor actually turns counterclockwise when viewed from the flywheel side. View attachment 387260the bed only hinges in the front. It is not hydraulic. It has a transmission with drum brakes on each output shaft to steer it. It's a manual dump. No cylinder.
