MetalChicken
Bronze Member
Just thinking out loud here. I was wondering if an X740 fitted with a rear 3ph could lift much on a pair of pallet forks. I can't find the spec anywhere - anyone have an idea of what it can handle?
What can a X7xx lift on the rear 3ph?
- Thread starter MetalChicken
- Start date
- Views: 1639
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,594
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Could probably figure twice the weight of a rear tiller or box blade. Do you want that in pounds or dollars ?? 
Seems I recall someone stacking concrete blocks on their 3 ph carry-all to find out what it would handle. Of course, need to counterbalance with weight on the front end.
Seems I recall someone stacking concrete blocks on their 3 ph carry-all to find out what it would handle. Of course, need to counterbalance with weight on the front end.
Eric102
Gold Member
If I remember right the specs are 450lbs one foot behind the arms.
mfreund
Veteran Member
The empty pallet! Seriously, it would make the front very light before you reached capacity.
Gittyup
Elite Member
- Joined
- Oct 4, 2007
- Messages
- 3,145
- Location
- Mid Atlantic
- Tractor
- Kioti CK25 Shuttle Shift, loaded tires, JD X739
I have a 40 gal sprayer that when full probably weighs about 450 lbs. it lifts that with no trouble as long as counter balanced with weight on the front
