What are the oldest threads on the TBN

[sixdogs]

I just posted in the "Dog Pics" thread and was surprised it started in 2009. Is this the oldest thread?

 

[dodge man]

Today’s Seat Time was started in 2008 by Lbrown.

 

[EddieWalker]

Active threads or are you asking when it all started? I started posting in 2003, and there where old threads back then.

 

[sixdogs]

Active threads or are you asking when it all started? I started posting in 2003, and there where old threads back then.

Active threads currently in use. What's the oldest you're aware of?

 

[Muhammad]

10+ years, 100+ replies, active within the past week:

TODAYS SEAT TIME

Got .8 of an hour on the BX1500 picking up small tree limbs and branches. Got 7 tenths of an hour on the BX23 filling in a small hole in the yard cleaning out at the end of a 6'' culvert and moving a few buckets of the free dirt I got about a month ago.

tractorbynet.com

Good morning!!!!

Just thought I'd start a Good Morning thread. Dry, and headed into the low 60's here in S. Michigan. Have a good one!!

tractorbynet.com

Tractors and wood! Show your pics

With heating season in full swing..... I was out gathering firewood today with my trusty mule. Pics of any tractor with logs split or not welcome:) my mighty bx said , the oil man can kiss my #%^.

tractorbynet.com

Just another junk chainsaw

I love that nobody knows about certain good saws out there. :laughing: Had to put in another piston today after a tear down to see what was up with the stuck ring. These saws were way ahead of their time IMO. 1984 Partner 5000 plus and I had a 1979 5000 open port that was strong or stronger...

www.tractorbynet.com

Dog pics

...Lets see your mutts...! This is my 18 month old retreiver...doing what he does best...!

tractorbynet.com

AZ ranch

I have been reading Obed's thread on building his house and it is awesome. I am totally amazed at what I have learned on this forum in the few short weeks I have been on it. I'm going to do a little thread on my own so I can get some of this fantastic advice, and hopefully cut back on some of...

www.tractorbynet.com

Tractor backhoe - homemade

Hi. Here I am again with some innovations. This idea has been bugging me for some time now...so I finally decided to do it... I'm building my own tractor backhoe attachment for my Belarus 820 tractor. As always it al started with some drawnings... I made approx 30 of them, but here are a few...

tractorbynet.com

Share Pics of People Hauling or Towing Something Wrong

Next time you see someone towing or hauling something wrong take a picture and post. If they over loaded, hauling a 20' board on a 6' bed, towing a 10k trailer with a Ranger, hauling a tractor not chained down or what ever share it. I saw this little S-10 Saturday with a few bags of concrete on...

tractorbynet.com

Flail Mower - Let's talk flail mowers

I just bought 5 acres and will build a new house, probably this fall. I plan to have about an acre around the house as a lawn area and the balance will be cut only two to three times during the growing season. I had intended to use a rotary cutter to cut the 4 acres, but the more I hear about...

tractorbynet.com

LS Tractor Oil, Gas, & Air Filter Information

Do we (who own LS tractors) need a sticky with oil, gas, air filter information? I will add that from what I gather the following info is for the R4010: Wix filter info: Fuel Filter P/N 33128, Engine - Mitsubishi S4QL Engine Oil Filter P/N 5106453, Engine - Mitsubishi S4QL Engine Air Filter...

tractorbynet.com

Anybody here ever make money gambling?

For the past month, they have been discussing building a casino in downtown Lansing, and those who support the idea claim the real benefit of such a project is the revenue it will create for the city. Many of those who are opposed to the casino say gambling is basically a tax on the poor, and...

tractorbynet.com

Bolens G154 / Iseki tx1300f

Hello, I did some work on a co-workers boat and in return he gave me a Bolens Iseki G154 tractor. He bought it last year to fix it up but boats are now taking his time. The tractor will not start. It turns over but he was told the plungers for the injectors are stuck. Also the clutch disk is...

www.tractorbynet.com

 

[CliffordK]

Does this give us free reign to dig up some Zombies?

 

[newbury]

Zombies often arise by themselves, usually do to a newbie using the broken search function and replying to an ancient thread.

 

[sixdogs]

Does this give us free reign to dig up some Zombies?

Sure looks like it

 

[sixdogs]

This is the oldest page, #62 with some very old threads

 

[CliffordK]

Hmmm...
@Muhammad is showing as joining Mar 21, 1998.

However, the oldest threads I'm finding are April 6, 2000.

One thread seems to indicate the start of a "New" site and the end of an "Old" site on April 6, 2000.

Welcome to 'Kubota Owning'

Welcome to \'Kubota Owning\' Greetings, TractorByNet.com Users! Welcome to the new forum! In this topic, ‘Kubota Owning’, you can discuss owning & operating with other owners & operators of Kubota tractors! If you need any basic information on how to use the new forum, click the...

www.tractorbynet.com

Welcome to 'Kubota Pricing'

Welcome to \'Kubota Pricing\' Greetings, TractorByNet.com Users! Welcome to the new forum! In this topic, ‘Kubota Pricing’, you can discuss Kubota Pricing with other users! If you need any basic information on how to use the new forum, click the 'Instructions' link at the top of the page...

www.tractorbynet.com

Welcome to 'Other Brands'

Welcome to \'Other Brands\' Greetings, TractorByNet.com Users! Welcome to the new forum! In this topic, ‘Other Brands’, you can discuss other tractor brands with other users! If you need any basic information on how to use the new forum, click the 'Instructions' link at the top of the page...

www.tractorbynet.com

Way To Go!

Hi Muhammad, Guess I am one of the "early bird's" on the new forum. Man, this is one slick deal! It will take me a little while to use all the features, but I just want to say a big "THANKS" for all you have done to give all us tractor "nuts" the best site on the whole Internet. BobT A...

www.tractorbynet.com

Pasture Maintenance

Hey, way to go, Muhammad ... new site looks great! Since nobodies responded yet ... I thought I'd back to the old site, copy this and ressurect it here ... 'course I'll be more patient this time - as I have to zip over to Europe for 10 days ... hopefully SOMEONE will have some clues for me when...

www.tractorbynet.com

The threads seem to be numbered more or less sequentially. And the number 2 thread comes from @Muhammad in the Kubota subforum.

I'm not entirely sure if there is actually a #1 thread.

 

[Muhammad]

Hmmm...
@Muhammad is showing as joining Mar 21, 1998.

However, the oldest threads I'm finding are April 6, 2000.

One thread seems to indicate the start of a "New" site and the end of an "Old" site on April 6, 2000.

Welcome to 'Kubota Owning'

Welcome to \'Kubota Owning\' Greetings, TractorByNet.com Users! Welcome to the new forum! In this topic, ‘Kubota Owning’, you can discuss owning & operating with other owners & operators of Kubota tractors! If you need any basic information on how to use the new forum, click the...

www.tractorbynet.com

Welcome to 'Kubota Pricing'

Welcome to \'Kubota Pricing\' Greetings, TractorByNet.com Users! Welcome to the new forum! In this topic, ‘Kubota Pricing’, you can discuss Kubota Pricing with other users! If you need any basic information on how to use the new forum, click the 'Instructions' link at the top of the page...

www.tractorbynet.com

Welcome to 'Other Brands'

Welcome to \'Other Brands\' Greetings, TractorByNet.com Users! Welcome to the new forum! In this topic, ‘Other Brands’, you can discuss other tractor brands with other users! If you need any basic information on how to use the new forum, click the 'Instructions' link at the top of the page...

www.tractorbynet.com

Way To Go!

Hi Muhammad, Guess I am one of the "early bird's" on the new forum. Man, this is one slick deal! It will take me a little while to use all the features, but I just want to say a big "THANKS" for all you have done to give all us tractor "nuts" the best site on the whole Internet. BobT A...

www.tractorbynet.com

Pasture Maintenance

Hey, way to go, Muhammad ... new site looks great! Since nobodies responded yet ... I thought I'd back to the old site, copy this and ressurect it here ... 'course I'll be more patient this time - as I have to zip over to Europe for 10 days ... hopefully SOMEONE will have some clues for me when...

www.tractorbynet.com

The threads seem to be numbered more or less sequentially. And the number 2 thread comes from @Muhammad in the Kubota subforum.

I'm not entirely sure if there is actually a #1 thread.

The new forum software came April of 2000. I set my join date to the start date of the site for posterity. I can check and see if thread #1 still exists but in reality the first real thread was on another software. I might have those messages backed up somewhere so but I would have to look.

 

[CliffordK]

My guess is this is primarily a curiosity, so not worth spending too much time on it.

The search function will take a person back to the early days, but one has to specify a max search date and a non-blank keyword.

Each individual subforum allows one to jump to the last page, and to scroll to the beginning (of that subforum).

 

[newbury]

The new forum software came April of 2000. I set my join date to the start date of the site for posterity. I can check and see if thread #1 still exists but in reality the first real thread was on another software. I might have those messages backed up somewhere so but I would have to look.

While your checking - are you still going to update your picture?

 

[riptides]

While your checking - are you still going to update your picture?

Good one.

We all appreciate the lack of time progression....in some things.

 

[Jstpssng]

I once went back and read my very first post. I learned something that day... sometimes I have a knack for wasting time.