Well, that didn't work. Valve Stem Protection

[woodlandfarms]

Well this blows.

I have been slowly replacing my tubless tires with tubed tires and these bad boys welded on.

http://www.tractorbynet.com/forums/...5065d1202006495-tires-rims-tubes-pict0943.jpg

On the 1850, these smack into the wheel motors on the inside. Just a heads up. Now I have to rethink my plans yet again.

 

[J_J]

Well this blows.

I have been slowly replacing my tubless tires with tubed tires and these bad boys welded on.

http://www.tractorbynet.com/forums/...5065d1202006495-tires-rims-tubes-pict0943.jpg

On the 1850, these smack into the wheel motors on the inside. Just a heads up. Now I have to rethink my plans yet again.

Carl,

Why not drill a new hole on the inside flat area for the valve stem, and weld or braze a washer in the old hole.

 

[cqaigy2]

Oh man, that sucks!

Thanks for the heads up.

 

[woodlandfarms]

Plans are re-thunk

Going to keep with the caps, just making sure the new ones are welded on flush with the inside rim.... I will keep the ones I have made so far for outside tires use and see how it all pans out...

I will get photos of the new results on Monday