Well, I broke down and bought a carry all frame

   / Well, I broke down and bought a carry all frame #11  
Carry all frames are great. You can turn them into very versatile tools. I use mine a lot. I based my design on an old YouTube video by Wilson Outdoors then added a lot of extra features. I have attached some pictures that may give you some ideas on how to build yours.

I also made a couple of YouTube videos showing all the features and how to build it. You might find them helpful.

Good luck with your carry all build! You're going to love it!
 

Attachments

  • vlcsnap-00384.jpg
    vlcsnap-00384.jpg
    482.8 KB · Views: 161
  • vlcsnap-00385.jpg
    vlcsnap-00385.jpg
    723.6 KB · Views: 152
  • vlcsnap-00386.jpg
    vlcsnap-00386.jpg
    797.4 KB · Views: 149
  • vlcsnap-00387.jpg
    vlcsnap-00387.jpg
    769.7 KB · Views: 151
  • vlcsnap-00390.jpg
    vlcsnap-00390.jpg
    828.9 KB · Views: 150
   / Well, I broke down and bought a carry all frame #12  
It is one of the best values out there. I have the same TSC unit and have 700+ lbs of lead in the back for counterweight. Using lead gives me a good sized space for chainsaws and tools.
 
   / Well, I broke down and bought a carry all frame #13  
Your post inspired me to get one. I also happened to buy 48 t stakes while I was there so as soon as I took it out of the bed of the truck I used it to haul the t stakes. It’s going to be very useful. Thanks for the tip.
 
   / Well, I broke down and bought a carry all frame #14  
The TSC carry-all frame is not compatible with a quick hitch system unless you create additional space behind the lifting links. I did this by adding a 2 X 4 board to the vertical frame member before attaching the back boards of the carry all.

I wound up with a simple L-shaped carry all, but added some anchoring ring bolts to the top and sides of the frame. It's very useful for many of the tasks I do such as carrying a brush saw, chain saws, fuel conainers, shovels etc. to a job site. And it allows me to use my FEL as an FEL at the same time.
 
   / Well, I broke down and bought a carry all frame #15  
Dang it that looks like something I have to have now
 
   / Well, I broke down and bought a carry all frame #16  
Yup, my first attachment was a set of 3 pt pallet forks which I mounted a pallet on and then I mount other stuff on the pallet as needed.
 
 

Tractor & Equipment Auctions

2014 UTILITY 53X102 DRY VAN TRAILER (A50046)
2014 UTILITY...
2015 MACK GU713 (INOPERABLE) (A50854)
2015 MACK GU713...
2007 Mitsubishi Fuso FE84D 16ft Dovetail Flatbed Truck (A50323)
2007 Mitsubishi...
Bron V75-3 Pull-Behind Hydraulic Vibratory Utility Plow (A49461)
Bron V75-3...
2022 Bobcat E88 Excavator (RIDE AND DRIVE) (A50774)
2022 Bobcat E88...
2000 TRAILKING TK110HDG-513 LOWBOY TRAILER (A50459)
2000 TRAILKING...
 
Top