Welding in the rain!
- Thread starter Western
- Start date
- Views: 6799
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
too rich for my blood!!!!
soundguy
soundguy
Egon
Epic Contributor
but that weld and electrodes better be dry./QUOTE]
Pictures always look good when there is rain splatering and spluting on the weld!
Well couldn't get a hold of him, but got a hold of one of his pipeline welding buddy's, last Bill heard he was "chasing girls at the senior citizen center".
Bill said Milt would "weld in **** fire" if it needed to be done, "back in the day" So I stand corrected and have gained knowledge. He did say precautions had to be taken as allot of you have said, dry gloves, dry rods, don't wrap weld leads around any part of your body and weld on DC. He also said it could kill you if you didn't know what you where doing, but mostly uncomfortable. He thinks technology has probably gotten better since their "heyday" (In their 70's).
Interesting, he said all the divers he knew of, were multi-man teams, with a crew up top monitoring the welders and the divers, and that "explosion" was the biggest fear when "dry box welding" I asked this time, he said the build a box under water and pump the water out then weld. Decompression was a PITA too.
Soooo I learned allot
Bill said Milt would "weld in **** fire" if it needed to be done, "back in the day" So I stand corrected and have gained knowledge. He did say precautions had to be taken as allot of you have said, dry gloves, dry rods, don't wrap weld leads around any part of your body and weld on DC. He also said it could kill you if you didn't know what you where doing, but mostly uncomfortable. He thinks technology has probably gotten better since their "heyday" (In their 70's).
Interesting, he said all the divers he knew of, were multi-man teams, with a crew up top monitoring the welders and the divers, and that "explosion" was the biggest fear when "dry box welding" I asked this time, he said the build a box under water and pump the water out then weld. Decompression was a PITA too.
Soooo I learned allot
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
speaking of explosion.. my buddy that does the salvage diving has done some jobs where they essentially have some kind of torch for cutting welds on big steel.. and it has explosion arrestors on it.. and you make darn sure everything is serviced before you go down!!
soundguy
soundguy
