Weight of the ML112 loader, bucket and subframe?

[djw250]

I'm considering buying a trailer, and I'm trying to figure out how much my tractor and loader weigh. I found the weight of the tractor, but I dug through the loader manual from cover to cover and couldn't find the weight of the loader. Does anybody know what the ML112 loader, subframe, and bucket weigh? I have the pinned on bucket, not the skid steer setup.

 

[AchingBack]

I wasn't able to get the loader weight specs. However, what I found may just be the info you need. The listed weight with loader is reported to be 5000 lbs.Cost to Ship - MAHINDRA 3510 WITH 112 FRONT END LOADER LOW HOURS - from Dobson to Seguin

 

[djw250]

Thanks AchingBack, that is helpful. With the tractor itself weighing in at 3881 lbs. per the manual, that puts the loader at 1120 lbs. I would have thought it weighed a little more than that.

 

[LAWALLSTRACTOR]

I think it is a little under that weight, but that is a good round figure for your purpose.

 

[rback33]

1120 would be about dead on. :thumbsup:

 

[rnds76b]

I understand that 1120# is the weight of everything, but does anyone know the weight of just the bucket?

 

[Sysop]

Can't say specific numbers for your unit, but I know with my unit the specified weight of the loader on the documentation was the weight of the loader without the bucket. Same with the backhoe. This is due to the different weights of various sizes and types of buckets and such that are available. I've even been told the weight listed on spec sheets for tractors are without the tires unless specified, due to the weight differences in the types of tires.

 

[johnsonauto]

If I remember correctly the 72" std duty pin on bucket was 350 lbs.

 

[rback33]

If I remember correctly the 72" std duty pin on bucket was 350 lbs.

I am a little late, but it's 199#.