DanielAlexander
Bronze Member
I am thinking of bolting a 3/8x 3 "x5" angle iron with landscape tines to the front edge of the bucket, tines curling down. Weeds in Florida grow so fast and my back hurts from pulling them. What do you think?
weeding attachment on bucket
- Thread starter DanielAlexander
- Start date
- Views: 2346
texasjohn
Super Member
I think that things attached to your 3PH are intended to dig into the ground.
Are you thinking that you can target individual weeds using the FEL?
Are you thinking that you can target individual weeds using the FEL?
OP
DanielAlexander
Bronze Member
Being able to reach and break free growth two feet high,drag them back and into piles . Anbo has a nice root rake ,for this, but it's not possible to purchase it yet.
jimmysisson
Veteran Member
- Joined
- Jul 11, 2005
- Messages
- 2,358
- Location
- W.Mass
- Tractor
- 1993 NH 2120 (the best), 1974 MF 135 (sold, but solid), 1947 Farmall A (bought, sold, bought back, sold again), 1956 MH50 lbt (sold, in 1980, darn it)
Westendorf makes a blade for under the back of the bucket, available with short teeth, that might work without wrecking your bucket: Front-End Loaders by Westendorf: loader for tractor, shade canopy, wagons, manure & landscaping equipment. go to Back-drag Blade. It might not rip as much as you want.
If you imagine using what you're proposing to make just like a York rake, I don't think it's going to pull weeds, unless the soil is pretty loose. Maybe with little stubby 4" teeth, but not with springy tines. You might be frustrated...
Jim
If you imagine using what you're proposing to make just like a York rake, I don't think it's going to pull weeds, unless the soil is pretty loose. Maybe with little stubby 4" teeth, but not with springy tines. You might be frustrated...
Jim
GinNB
Gold Member
- Joined
- Dec 8, 2007
- Messages
- 341
- Location
- NB, Canada, eh?
- Tractor
- 2x Kubota M108S, M105S, 2x M9000, IH885, IH584, IH484, IH454, F3000, F3610, C50, JX70, Landini 5830, JD4630 sprayer
jimmysisson said:
Couldn't find it for some reason. Got a direct link?
GinNB, Enter "Back-drag Blade" in the search box (upper lefthand side) Then hit the "Go" button next to the search box 
. (I'm glad you can edit after the post )
Video
http://www.loaders.com/userdocs/products/61_WindowsMedia_-_DSL.wmv
. (I'm glad you can edit after the post ) Video
http://www.loaders.com/userdocs/products/61_WindowsMedia_-_DSL.wmv
Last edited:
GinNB
Gold Member
- Joined
- Dec 8, 2007
- Messages
- 341
- Location
- NB, Canada, eh?
- Tractor
- 2x Kubota M108S, M105S, 2x M9000, IH885, IH584, IH484, IH454, F3000, F3610, C50, JX70, Landini 5830, JD4630 sprayer
I tried that a number of different ways but got nothing. The page refreshed but I stayed on the bucket page with no results. Found out why this time. I hit "Enter" instead of clicking the Go button. It looked like it did something because of the page refresh but it really didn't.
Anyway, all is good now that I figured out it's an entry box for mouse people, not keyboard people.
Anyway, all is good now that I figured out it's an entry box for mouse people, not keyboard people.
texasjohn
Super Member
try this Front-End Loaders by Westendorf: loader for tractor, shade canopy, wagons, manure & landscaping equipment.
go to BUCKET OPTIONS, then the bottom of that page.
also, teg's link worked for me... it's a WMV video.
go to BUCKET OPTIONS, then the bottom of that page.
also, teg's link worked for me... it's a WMV video.
