J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,928
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
You will need a splitter that will divide the pump supply for the hyd motor.
Something like this with a 60 GPM capacity.
Divides the flow into two equal paths.
This valve is only 8 GPM. Prince or Parker might have one you need.
You need a 0-60 GPM capacity divider valve.
3/8" 0-8 GPM DIVIDER VALVE
If your PB is before the splitter, everytime you move the valve lever, the hyd motor and everything after the splitter will slow. will slow.
If the 60 GPM pump is all the flow, the flow needs to be split before any other valve.
This will allow each side, A, and B, to have a dedicated supply.
Something like this with a 60 GPM capacity.
Divides the flow into two equal paths.
This valve is only 8 GPM. Prince or Parker might have one you need.
You need a 0-60 GPM capacity divider valve.
3/8" 0-8 GPM DIVIDER VALVE
If your PB is before the splitter, everytime you move the valve lever, the hyd motor and everything after the splitter will slow. will slow.
If the 60 GPM pump is all the flow, the flow needs to be split before any other valve.
This will allow each side, A, and B, to have a dedicated supply.