Universal hydraulic QH for 3-point

PikaPika · Dec 30, 2019

Here is QH for both cat1 and cat2 equipment.

UNIVERSAL QUICK HITCH FOR TRACTORS - YouTube

More Forum Attachments : My quick hitch is hydraulic

beenthere · Dec 30, 2019

Have the iMatch QH, and don't see a need for the additional motions as featured here in this video.
But see many degrees of freedom that may be handy at certain times in difficult situations.

If the cost is $350 US dollars or less, may have a market. Expect it is much more than that.

PikaPika · Sep 20, 2020

My NEW Weld on Euro Hooks and Balls

Weld on hooks and balls - YouTube

Markus

PikaPika · Nov 23, 2020

My next trial is to make Euro hooks for big tractors. And I use them from the cabin.
Not difficult but much to measure. Tractor was working hole time at field.
I drive 3 km to my outdoor smithy for welding and back about 10 times.

And my new video: Big tractor and Euro hooks.

Weldable Hooks and Balls for Tractors - YouTube

Markus

PikaPika · Nov 23, 2020

My next trial is to make Euro hooks for big tractors. And I use them from the cabin.
Not difficult but much to measure. Tractor was working hole time at field.
I drive 3 km to my outdoor smithy for welding and back about 10 times.

View attachment 677510

And my new video: Big tractor and Euro hooks.

Weldable Hooks and Balls for Tractors - YouTube

Markus

PikaPika · Dec 12, 2020

John Deere is ready now to be operated from its cabin for hitching/unhitching.

Before I made a linkage to open both hook latches together from the cabin for unhitching.

Now I have a new linkage to move the right lower link sideways from the cabin.
It makes possible to use two different category equipment with the same tractor.
And non standard equipment too.

Parts are quit simply

And now it has a new hydraulic top link too.

I think that this is the most cheep way to operate from the cabin.
If you like then hydraulic stabilizer bars are good too but expensive.

Now every tractor new or old can get weldable hooks and operation from the cabin.
I have made what I can. Now you must go on!

Good luck to you

My last video JD and Kubota

Tractor Quick Hooks - YouTube

Markus