Unable to raise bed on a "D". A solution.

   / Unable to raise bed on a "D". A solution. #1  

Spudgunner

Gold Member
Joined
Sep 17, 2003
Messages
383
Location
Central Idaho Mtns
Tractor
Kubota BX-23 & Toolcat 5600 D
I've been having an occasional problem with the valve that is used to raise the bed on my TC. It turns out there's a solenoid that retracts a metal rod when the TC thinks it's safe enough to do so. This rod blocks the actuation handle (the one with the orange plastic grip that isn't the throttle). Apparently the "D" is the only version of the TC that suffers from this nifty hardware. Anyway, if this great feature fails the bed has to be manually raised. Ugh.

What I did on my TC was to remove the console and passenger side access panel and then pull said solenoid. Takes a small adjustable wrench. A small spring and "blocking rod" was removed from the solenoid guts and then the solenoid was reinstalled. Problem solved. The solenoid of interest is the rearmost of three such devices clustered together (passenger side) on the big valve body (I don't know hydraulic techno-speak) that lives in the "tunnel" between the seats.

I think this interlock (PIA) is slaved to the position of the armrest. When it's down you can raise the bed; otherwise, nyet. Now, in this regard, my "D" acts like an earlier version of the TC.
 
   / Unable to raise bed on a "D". A solution. #2  
good to know - thanks
 

Tractor & Equipment Auctions

2014 STONE RIDGE 38FL 5TH WHEEL CAMPER (A50854)
2014 STONE RIDGE...
2010 SHOP MADE WINDMILL TRAILER (A50854)
2010 SHOP MADE...
2021 Takeuchi TL12V2 Skid Steer (A51242)
2021 Takeuchi...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2006 GMC 4500 Bucket Truck with Altec AT200 - 34FT Working Height (A51039)
2006 GMC 4500...
40ft Shipping Container (A49461)
40ft Shipping...
 
Top