type "b' 3pt arms? wrong size hole

   / type "b' 3pt arms? wrong size hole #1  

PIPELAGGER

New member
Joined
Jun 4, 2011
Messages
4
Tractor
massey ferguson Mf135
i bought my MF 135 wiht a 200loader and 52-212 backhoe. the gut threw in the arms ..no center one, but when i went to hook up AFTER(uggggh) remving backhoe, i fine that the pins n my tractor are 7/8'diameter and the swivelball that would apper to go corrrectly to it 1-1/8'. the other end is 7/8 but seems wrong or aqward to swing it to there. I cant bushing it up becuase the cotterpin holes are for the smaller ball. this guy probably never used the arms so the question is where i was suppoese to have them the aqward way or if thses are the wrong arms to tractor. it seemed to me the implement i was going to use would have needed the 7/8 ball also. that was a 4' rototiller i was renting. this will be quite a journey and probaly more expense than worth it to find correct arms at a salvage yard If that is the problem. I did see that there are differnt size pegs, but i think those are like wheel studs and are pounded in not threaded
 

Tractor & Equipment Auctions

2016 CAT 289D SKIDSTEER (A50854)
2016 CAT 289D...
2025 Swict 72in Bucket Skid Steer Attachment (A50322)
2025 Swict 72in...
2016 INTERNATIONAL 4300 24FT BOX TRUCK (A51219)
2016 INTERNATIONAL...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
2011 Ford F-250 Omaha Service Truck (A50323)
2011 Ford F-250...
NANCE UNDERGROUND CONDUIT BOX (A50854)
NANCE UNDERGROUND...
 
Top