tuff torq model k62

/ tuff torq model k62 #1  

ericbx1500

Gold Member
Joined
Jul 16, 2005
Messages
297
Location
Michigan
Tractor
BX2380, scotts 48
i have a k62 hyd on my tractor with about 400 hours on it. has anybody ever changed the fluid in one of these. is it necessary to do so. i have no problems with it. it uses 10w30 and thought after 6 seasons maybe i should change it /forums/images/graemlins/confused.gif
 
/ tuff torq model k62 #2  
I just changed the oil in a K65, only because the owner said he topped if off with transmission fluid instead of the 5W50 synthetic oil that is supposed to be in it. I don't know if it is necessary to change the oil, but it probably isn't a bad idea. I did notice on the Tuff Torq web site that the K62 uses 2.5 liters of <font color="blue"> J20C Hy-Gard High Viscosity</font> oil. There is a drain plug on the bottom but the fill hole will have to be accessed from under the tractor housing. In my case, I had to remove the seat & unbolt the housing.
 

Marketplace Items

OVERHEAD PROJECTOR, HP PRINTER, (2) MONITORS (A64276)
OVERHEAD...
(2) FIFTH WHEEL PLATES (A65643)
(2) FIFTH WHEEL...
2016 JCB 3CX 4x4 Loader Backhoe (A64194)
2016 JCB 3CX 4x4...
2018 INTERNATIONAL LT SERIES (A65643)
2018 INTERNATIONAL...
2014 KENWORTH T370 ROAD TRACTOR (A65054)
2014 KENWORTH T370...
MAC Hi Power Towable Generator (A65579)
MAC Hi Power...
 
Top