freedomlives
Platinum Member
- Joined
- Apr 12, 2015
- Messages
- 578
- Location
- Husak, Slovakia, EU
- Tractor
- Iseki TS35F, Goldoni Special 140 with powered trailer -- Goldoni Special 128 -- Goldoni Uno for mowing -- Czech Vari system
I drained the old oil that the importer put it, as it was 90 weight and the manual calls for 140 weight, and I feel like the gears are noisy. Out came 13 liters, capacity in the manual is listed as 16.
I pumped in about 10 liters. Let it set awhile. Then I unscrewed the plug next to the floorboard for checking the oil, and it came out. So I connected a nipple and a hose to collect the oil, and eventually to speed it up ran the pump in reverse on that nipple, but the oil kept coming. I sucked 4 liters out, then stopped. I'm stumped-- is it somehow pulling oil up from the case? Let's say I pump in a full 16 liters, is there actually some problem that's going to occur if the transmission is over filled?
I pumped in about 10 liters. Let it set awhile. Then I unscrewed the plug next to the floorboard for checking the oil, and it came out. So I connected a nipple and a hose to collect the oil, and eventually to speed it up ran the pump in reverse on that nipple, but the oil kept coming. I sucked 4 liters out, then stopped. I'm stumped-- is it somehow pulling oil up from the case? Let's say I pump in a full 16 liters, is there actually some problem that's going to occur if the transmission is over filled?