Trying to buy a tractor - 3 options has me confused on best value for my use - HELP
- Thread starter UNCBLUE
- Start date
- Views: 34822
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,824
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
@0% you most likely will not get any off MSRP. So, is 0% really 0% ?
Musdalen
Gold Member
If they tell you that there is no price difference between full payment or 0% for 60 mo, then I guess your question is moot. So far, that's what I've been told by Deere.
Kubota will take of $1500 for a full payment.
These are my local dealer obviously, may differ elsewhere.
GManBart
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 4,976
- Location
- Detroit, Michigan
- Tractor
- Massey Ferguson 241, Kubota SVL90-2
That's why I always talk cash price first...to see if they raise the price for other options.
/ Trying to buy a tractor - 3 options has me confused on best value for my use - HELP
#145
Alllllllrrriiiight fellas... It's been a long process but i'm happy to report that I've made a deal 
... Ended up settling on $13k out the door with a few cans of touch up paint and new decals.
I need your help on deciding on a few upgrades while its there.... tooth bar installed for $400? SSQA now or later? said they could install both the adapter for $450 and new 66" SSQA bucket for $625... if i want to use my existing bucket, I can get adapter for $250... He said he would give me a $100 credit for the old bucket if i didn't want it (i actually asked for that the addtl credit)..since its bent up top and used, i figure probably not a bad deal... I dont have a welder so likely easier to just have them do it... thoughts?
also he said they'd install a WR long third while there for $1035... How good would you rank that pricing?
... Ended up settling on $13k out the door with a few cans of touch up paint and new decals. I need your help on deciding on a few upgrades while its there.... tooth bar installed for $400? SSQA now or later? said they could install both the adapter for $450 and new 66" SSQA bucket for $625... if i want to use my existing bucket, I can get adapter for $250... He said he would give me a $100 credit for the old bucket if i didn't want it (i actually asked for that the addtl credit)..since its bent up top and used, i figure probably not a bad deal... I dont have a welder so likely easier to just have them do it... thoughts?
also he said they'd install a WR long third while there for $1035... How good would you rank that pricing?
/ Trying to buy a tractor - 3 options has me confused on best value for my use - HELP
#146
Shaneard
Veteran Member
- Joined
- Nov 18, 2016
- Messages
- 1,345
- Location
- Southern Virginia
- Tractor
- Ford 4630, Two IH 140's, John Deere A
If your going to get a SSQA adapter in the future I say go ahead and let them do it there now and be done with it. A quick search on the internet I found a 66" bolt on tooth bar for $275. Look around before paying them $400 for that.
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,305
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
The SSQA is worth the money and if you get it now you will be done with it and on your way. I would just order a tooth bar, they often need two holes drilled and bolts put in. Not a big deal at all.
Luke'sScreenName
Elite Member
- Joined
- Mar 1, 2015
- Messages
- 3,710
- Location
- Lakes Region, NH
- Tractor
- Kubota MX4800 with BH-90X hoe; Hustler FastTrack 48; B3300SU (sold); 1969 Case 680B CK (sold)
X3 :thumbsup:
Musdalen
Gold Member
I'm about to buy a new tractor - about 39 horses. Why would I really want SSQA adapter for it if all I plan on using on the front end is the bucket or forks?