LS MT 225s. Already have a carry on hold at my dealer, just need to pick it up.
Tractors and wood! Show your pics
- Thread starter Bota4me
- Start date
- Views: 4481602
Sawyer Rob
Super Member
Today was a really nice day, and I FINALLY had a chance to do something besides rotary cutting! SO, I jumped on my loader tractor, hooked up a trailer, and headed to some logs that I needed to pick up,
Some of these logs were decent, and some not so much!
Anyway, after getting all loaded up, I headed home,
where I hooked to my wagon and went back for a second load, and here it is!
There's a LOT of 2x6's in "that" load!!
SR
Some of these logs were decent, and some not so much!
Anyway, after getting all loaded up, I headed home,
where I hooked to my wagon and went back for a second load, and here it is!
There's a LOT of 2x6's in "that" load!!
SR
There's a LOT of firewood in that first load!Today was a really nice day, and I FINALLY had a chance to do something besides rotary cutting! SO, I jumped on my loader tractor, hooked up a trailer, and headed to some logs that I needed to pick up,
Some of these logs were decent, and some not so much!
Anyway, after getting all loaded up, I headed home,
where I hooked to my wagon and went back for a second load, and here it is!
There's a LOT of 2x6's in "that" load!!
SR
Rustyiron
Super Member
I think that we're getting you really nice day today! 
Nice loads.
Nice loads.
Gordon Gould
Super Member
- Joined
- Apr 1, 2007
- Messages
- 6,645
- Location
- NorthEastern, VT
- Tractor
- Kubota L3010DT, Kubota M5640SUD, Dresser TD7G Dozer
Seems like it here too. 47 degrees right now.I think that we're getting you really nice day today!
Nice loads.
gg
Sawyer Rob
Super Member
True, but some of that "firewood" will make nice 4x6's for the lumber to sit on...There's a LOT of firewood in that first load!
SR
Gordon Gould
Super Member
- Joined
- Apr 1, 2007
- Messages
- 6,645
- Location
- NorthEastern, VT
- Tractor
- Kubota L3010DT, Kubota M5640SUD, Dresser TD7G Dozer
Couldn't stay out of the woods on such a nice day. Started working on an over crowded section of mixed good young hardwood trees and junk. Releasing (spacing) the nicest ones.
gg
gg
Loaderman22
Veteran Member
- Joined
- Jan 11, 2017
- Messages
- 1,046
- Location
- Hudson Valley, NY
- Tractor
- 1947 Ford 2N, 75 MF 30B, 75 Swinger Loader, 1979 Cat D3
No tractor, but did feed the chainsaw quite a bit today. That's a 25" bar on the saw...
Then split some fresh cut maple, and stacked in my totes.
All done
Then split some fresh cut maple, and stacked in my totes.
All done
