Tractor related bonehead move of the month-I'll start

[sd455dan]

RTII,

Your posting time was off a little: Unfortunately, just as you posted, the thread was hijacked. With respect to your "bonehead" action, I have done the same thing, also. I have finally trained myself to restart the thought sequence every time I get an interruption. I'm especially careful when I'm doing electrical work. (That's another story, not to be shared here.) When working with stuff like tractors, chainsaws, electrical circuits, oxy-acetylene torches, I'm trying to make sure I follow a fairly rigorous set of procedures. One of the best steps is to require a total process start-over, whenever there is an interruption. Thanks for the post, and thanks for the reminder.

Thread theft occurs all the time. I think almost all posters try not to do it. However, on most posts, there is new information that one or more of us wants to pursue. Sometimes in our enthusiasm we forget to start a new thread. It's one of the smaller "bonehead" actions we all make.

Anyway, thanks for your post. It got me thinking again.

PMH

Sorry about the derailing of the thread, it's only the second thread I've started (ever) I don't do Facebook or Twitter, so this is all pretty new to me, but as stated at the beginning of the thread ,I would update progress on trying to fix the damage caused by my bonehead move.. I see that posting the repair on the same thread,. was another (bonehead move) what I should have done was started a new thread, concerning the repair, that way the threads continuity stays true. My apologies to anyone who has been offended . Hopefully anyone who wants to post their own bonehead move will still do so

 

[RTII]

Sorry about the derailing of the thread, it's only the second thread I've started (ever) I don't do Facebook or Twitter, so this is all pretty new to me, but as stated at the beginning of the thread ,I would update progress on trying to fix the damage caused by my bonehead move.. I see that posting the repair on the same thread,. was another (bonehead move) what I should have done was started a new thread, concerning the repair, that way the threads continuity stays true. My apologies to anyone who has been offended . Hopefully anyone who wants to post their own bonehead move will still do so

It's a small thing in the big scheme. No offense taken and no apologies needed. Nice job on your tractor!