RamingtonStall
New member
New to farming and looking for Tractor for Cutting 20 acres of Hay, doing Brush Hog work and developing trails through 55 acres of woods. Any recommendations would be appreciated.
Tractor for cutting hay and brush.
- Thread starter RamingtonStall
- Start date
- Views: 2739
The kid
Elite Member
- Joined
- Apr 25, 2012
- Messages
- 3,888
- Location
- Middle Tennessee
- Tractor
- 1965 135 gasser, 1967 135 diesel
:welcome: to TBN. Depending on your budget, terrain and what you want to do with it would reflect what you need. Do you want used or new. To bail hay you'll need a bailer. Round or square. You already mentioned needing a bushhog. Five foot or six. Depends on the size and power of the tractor you buy. Trails? Boxscraper? There are many types of tractors. There are several good forum threads here you can pose your same question and get a variety of answers. Have a great day.:wave:
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,084
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
Sorry, but I know nothing about haying, I believe there is a special forum on that. Several members do that bigbull338, foreman Etexas, Mountainviewranch come to mind; can't remember the others off hand. If they don't show up might want to look for their threads or PM them.
OP
RamingtonStall
New member
Hi guys! Thanks for the welcome. I will check through the other threads.
creekbend
Super Star Member
The previous members have offered sound advice, and I concur. BTW. welcome aboard. Best wishes.
foreman Etexas
Elite Member
- Joined
- Jul 7, 2011
- Messages
- 3,273
- Location
- texas
- Tractor
- Kubota (2010)M7040,(2012)M7040,New Holland(2004)TL100
I use a Kubota M7040(64pto HP),my cutter is a 8ft Vicon and baler is a Vermeer 5410 Rebel(5x4) works perfect for me. My shredders are a Landpride 8ft and Woods 12ft,pulls both fine.What are you looking at doing square or rounds? Guess most important is budget,got any idea? Cab vrs openstation,2x4 vrs 4x4,place level or hills,so many descions and questions
Give us a budget and I can assure you,you will get alot of great suggestions and welcome to TBN.....
Give us a budget and I can assure you,you will get alot of great suggestions and welcome to TBN.....
kensnelling
Veteran Member
Welcome from Oklahoma.
Ken
Ken
flusher
Super Member
- Joined
- Jun 4, 2005
- Messages
- 7,555
- Location
- Sacramento
- Tractor
- Getting old. Sold the ranch. Sold the tractors. Moved back to the city.
Welcome to TBN-join the fun.
Something like my 2008 Mahindra 5525 (55 hp engine, 45 hp pto) with a front end loader (FEL, 6-ft wide bucket) would be a good fit to your jobs. All the major dealers have comparable tractors that you can check out. YOu'll need to decide the type of tranny (straight old fashioned gear like my 5525, shuttle shift, hydrostatic, etc). I have a little 6-ft hayfield that I mow with a 7-ft sicklebar mower, rake with a 10-ft wide 5-bar side delivery rake, and bale with a Massey Ferguson 124 baler (two-twine, small squares 14x18x45-60 inch long bales).
Good luck.
. Something like my 2008 Mahindra 5525 (55 hp engine, 45 hp pto) with a front end loader (FEL, 6-ft wide bucket) would be a good fit to your jobs. All the major dealers have comparable tractors that you can check out. YOu'll need to decide the type of tranny (straight old fashioned gear like my 5525, shuttle shift, hydrostatic, etc). I have a little 6-ft hayfield that I mow with a 7-ft sicklebar mower, rake with a 10-ft wide 5-bar side delivery rake, and bale with a Massey Ferguson 124 baler (two-twine, small squares 14x18x45-60 inch long bales).
Good luck.
flusher
Super Member
- Joined
- Jun 4, 2005
- Messages
- 7,555
- Location
- Sacramento
- Tractor
- Getting old. Sold the ranch. Sold the tractors. Moved back to the city.
Make that a 6-acre hayfield