traction belt ?
- Thread starter greycat
- Start date
- Views: 3173
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,732
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
the traction belt is self adjusting, be sure that the two pulley tensioner setup is working free and allowing the belt to tighten. You did get it back on all pulleys?
Hi Joecdeere, Thanks for the reply. I dropped the mower deck and I'm guessing that the tensioner is the spring on the left side and heavy duty spring on the right side that move when the clutch is depressed ??
Should I spray with WD 40 ?? Also do you have a diagram that shows the tensioner ?
thanks, greycat
Should I spray with WD 40 ?? Also do you have a diagram that shows the tensioner ?
thanks, greycat
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,732
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
if it's an LT133 the highlighted part is what moves when the pedal is pushed and the assy moving with the belt weaving through the two pulleys is what keeps it tight.
