Top and Tilt on the left side?

   / Top and Tilt on the left side? #11  
There is/was a TBN member here who had a tilt cylinder on both left and right sides.

Is there value to do this? I have thought about it a few times.
Maybe not the member that @von-mil was thinking of but I have dual tilt cylinders. I use a Land-Pride back blade extensively for "landscaping" and the dual cylinders allow me to easily change the angle to +/-15 degrees. This is great for ditches and swales and also allows me to break up my damned clay "soil" with the corner of the blade.
 
   / Top and Tilt on the left side? #12  
Maybe not the member that @von-mil was thinking of but I have dual tilt cylinders. I use a Land-Pride back blade extensively for "landscaping" and the dual cylinders allow me to easily change the angle to +/-15 degrees. This is great for ditches and swales and also allows me to break up my damned clay "soil" with the corner of the blade.
Here's some photos:

IMG_3815.JPGIMG_3817.JPG
 
   / Top and Tilt on the left side? #13  
Is there value to do this? I have thought about it a few times.
I believe the reason he gave for a tilt cylinder on each side was so that if he raised both sides up fully, he could be assured that the attached implement was perfectly level. Then the 3PH could be raised and lowered as desired.
 
   / Top and Tilt on the left side? #14  
I believe the reason he gave for a tilt cylinder on each side was so that if he raised both sides up fully, he could be assured that the attached implement was perfectly level. Then the 3PH could be raised and lowered as desired.
Sounds reasonable. Particularly when The blade does not have a built-in tilt feature.
 

Tractor & Equipment Auctions

FRONT END LOADER BUCKET (A53843)
FRONT END LOADER...
2015 WESTERN STAR  4900 SB (A55745)
2015 WESTERN STAR...
2023 New Holland CR10.90 Combine - 330 Engine Hours - 251 Separator Hours (A55314)
2023 New Holland...
2025 JMR 36in Mini Skid Steer Bucket (A53421)
2025 JMR 36in Mini...
20ft Shipping Container (A54865)
20ft Shipping...
UNUSED 6' 5" WORKBENCH (A52706)
UNUSED 6' 5"...
 
Top