Toolcat Hydraulic Fluid Specs.

   / Toolcat Hydraulic Fluid Specs. #1  

Dakota Kid

New member
Joined
Mar 30, 2017
Messages
8
Location
Parts Unknown
Tractor
New Holland TC30 (x3) , Ford 3910 w/FWA, New Holland 9030 Bidiretional, Bobcat Toolcat 5610.
Any one know what Bobcat calls for on hydraulic fluid specs? Bobcat seems to be elusive on there specs. Here's my situation, I have a 5610 toolcat with rear hydraulics that shares front and rear attachments with 5 other Ford/Newholland tractors, three of them are hydrostats. I obviously have cross contamination of oil to my toolcat. I use Traveller Premium universal tractor trans/hydraulic fluid from TSC in my tractors, It does list and meet ford/newholland specs on the label of the jug.
I'm looking to use a universal fluid that I can use in all my equipment. Any one use none-bobcat fluid in your toolcats? I'm open to any advice or suggestions from you other Toolcat users, I'm currently at a point where I need to add fluid to my toolcat due to a blown hose on the grapple fork.
 
   / Toolcat Hydraulic Fluid Specs. #2  
Any one know what Bobcat calls for on hydraulic fluid specs? Bobcat seems to be elusive on there specs. Here's my situation, I have a 5610 toolcat with rear hydraulics that shares front and rear attachments with 5 other Ford/Newholland tractors, three of them are hydrostats. I obviously have cross contamination of oil to my toolcat. I use Traveller Premium universal tractor trans/hydraulic fluid from TSC in my tractors, It does list and meet ford/newholland specs on the label of the jug.
I'm looking to use a universal fluid that I can use in all my equipment. Any one use none-bobcat fluid in your toolcats? I'm open to any advice or suggestions from you other Toolcat users, I'm currently at a point where I need to add fluid to my toolcat due to a blown hose on the grapple fork.
If your Toolcat is not new and not still under warranty your good to go with the Travllers . :thumbsup:
 
   / Toolcat Hydraulic Fluid Specs. #3  
Recommended ISO viscosity grade (VG) and viscosity index (VI)

VG 100; Minimum VI 130 for 40F to 120F
VG 46; Minimum VI 150 for -40F to 80F
 
   / Toolcat Hydraulic Fluid Specs.
  • Thread Starter
#5  
Thanks for the impute Jabonee , I topped it off with TSC Traveller. Just like the idea of using the same fluid as in my other equipment.
 

Tractor & Equipment Auctions

Kubota L503OD 50HP Utility Loader Tractor (A50322)
Kubota L503OD 50HP...
2018 FABRIQUE 20FT TRAILER (A51222)
2018 FABRIQUE 20FT...
1999 INTERNATIONAL PAYSTAR 5000 TANDEM AXLE DUMP TRUCK (A51222)
1999 INTERNATIONAL...
Skid steer auger plate (A50322)
Skid steer auger...
2005 Ford F-550 Bucket Truck, VIN # 1FDAF56P45EB88239 (A48836)
2005 Ford F-550...
2025 CFG Industrial TK35R Mini Track Loader Skid Steer (A50322)
2025 CFG...
 
Top