Tool Box on ROPS

[KCinBr]

Just finished the first improvement on the new Kubota L2800 today, I needed a tool box for those little things you need while working with the tractor.
So I rounded up some scrap metal and an unused tool box and went to work. The requirements were that it had to be mounted where it would be handy and not interfere with anything else , also had to be mounted in such a way that it would require no drilling or welding on the tractor.(it's still got that new tractor smell /forums/images/graemlins/grin.gif)

So this is what I came up with>>>>>>>>>>

 

[hobbyfarm]

Good job! /forums/images/graemlins/cool.gif
Just a little Kubota gray and nodody'll know the difference. /forums/images/graemlins/shocked.gif

 

[44trxfun]

Nifty! Neat! Cool! Great approach!

 

[BubbaJr]

That's a real nice job. One thought though. Around here if you go out on the highway without a SMV (Slow Moving Vehicle) sign attached to the rear of your tractor, you are asking for a citation. But if you never play in traffic, it's a non-issue. /forums/images/graemlins/grin.gif

 

[odleefs]

Nice toolbox/tractor! And the toolbox is big enough to hold some BEvERages! /forums/images/graemlins/laugh.gif

 

[Jstpssng]

Nice job. Mind if Iborrow your idea? I was going to weld a bracket onto my roll bar, until someone here mentioned that it could compromise the strength of the roll bar.
(I also need to integrate a chain saw holder... nothing worse than pushing back brush, and watching a new Husky roll under the tires 'cause I forgot it was in the bucket.)

 

[Cityboyfarmer]

Nice job! I was contemplating doing something similar to my 5205. I need a place for adjustable wrenches, chains, clevis hooks, pins and bushings etc.

I'm feeling inspired by your photos! /forums/images/graemlins/grin.gif