TNT information

[BBELL]

I've got a L4310 and I've already have the center link cylinder, but I having a hard time finding a cylinder for the tilt part. I measured the arm thats on there now, it is 19 " long so I figure I should have a cylinder that would retract and return about 4" plus and minus to 19", so that would be a 15" retracted length cylinder? It also has 5/8 pin holes. I'm I right or not. And if so where can I find one of these animals?

 

[Henro]

You might try The Surplus Center <---click here /forums/images/graemlins/smile.gif

 

[Inspector507]

You can get just the tilt cylinder if you need that, with whatever ends on it to fit
TNT

 

[ronjhall]

<font color="blue"> it is 19 " long so I figure I should have a cylinder that would retract and return about 4" plus and minus to 19" </font>

BBELL

My top cylinder is 18 1/2" retracted between pin centers. It works very well on my B2910.

A 8" stroke cylinder will be hard to find that is shorter than 20" between pin centers.

Here is a link to Inspector507 post on Terrain Contour Control. The cylinder looks like it is about 20" overall length.

Click Here