Thought I seen it all!

/ Thought I seen it all! #2  
I hate seeing things like this ona site where new owners might get the idea that operating a TBL like that is a good idea. Even if a larger machine was used to do the excavating and the little guy was brought in just to stage the video this is still a bad idea.
 
/ Thought I seen it all!
  • Thread Starter
#3  
I hate seeing things like this ona site where new owners might get the idea that operating a TBL like that is a good idea. Even if a larger machine was used to do the excavating and the little guy was brought in just to stage the video this is still a bad idea.

You got it wrong. The idea is to tell them this is a no no. The bad idea is to just let them see it on Youtube and assume it's OK to operate it this way.

Henri
 
/ Thought I seen it all! #4  
Henri, I get the idea of discussion about the unsafe operation as long as it accompanies such a video. Your post of the video didn't say - "this is really a bad idea." I've learned that common sense isn't so common - the video illustrates that very well. I know that's your point but not everyone will.

I suppose it is the old industrial arts teacher in me - I much prefer to show someone the right way to operate equipment. I also prefer to show them how to use the right tool for the job. Videos like this don't do either. Too often a negative example that doesn't show the consequences and teaches wrong operation and use of the wrong tool for a job. This video doesn't show the tractor turn over or the equipment failure that often follows such cavalier regard for safety and abuse of equipment.

Thanks for letting me ramble a bit.
 
/ Thought I seen it all!
  • Thread Starter
#5  
Ted, I understand what your saying and I agree. But you are also making my point. That's the whole idea. Anyone that will view and read this tread should understand the stupidity of the video. If they don't, well..... Nuff said!

Henri
 
/ Thought I seen it all! #6  
Some shouldn't own tractor.
 
/ Thought I seen it all! #7  
One word for the guy in the video...IDIOT!
 
/ Thought I seen it all! #8  
I'm with you Henri!
 
/ Thought I seen it all! #9  
The guy is obviously just trying to improve the gene pool. If it inspires others to improve the gene pool then so be it.
 
/ Thought I seen it all! #10  
The guy is obviously just trying to improve the gene pool. If it inspires others to improve the gene pool then so be it.

Many times I think just like you. No natural selection in the human race. Then we have people who want to breed with those who don't want to thrive. No where else in nature.

I know it is a probably a little harsh and bad thinking but as long as there is no victim, "so be it" as you say.
 
/ Thought I seen it all! #11  
Would I lay my tractor on its side to dig under a stump? no
Would I be worried about oil flow and sump levels? yes
Would I apply side load my rims and axles like that with hydraulic digging force? no
Is the man within his rights to risk damage to his own machine to accomplish a job? yes

It looks as though the ROPS may have already been touching the piles, and he appeared to be contained inside it, so.......
the next question I guess I would ask is: Was this rented or borrowed equipment?
 
/ Thought I seen it all! #13  
I'd like to see how he got the tractor into that position and back out again.
 
/ Thought I seen it all! #14  
I'd like to see how he got the tractor into that position and back out again.

He didn't get out... he's still in the hole with the tractor on top of him and the stump on top of the tractor. Last I heard, they were calling in a wood carver to turn the stump into a nice marker.
 
/ Thought I seen it all! #15  
It’s those idiots that make the feds constantly impose new safety mandates making our equipment less enjoyable to use. They also jump on TBN every so often complaining about the poor quality of their tractor after the oil pump cavitates and the engine locks up…
 
/ Thought I seen it all! #16  
I'm with milkman636 worried about oil levels etc. That looks very similar to an oak stump I tried to remove that was wrapped around rocks and would not budge.
At least I had the sense to stop and call in a big backhoe to finish the job. Looks like he will need something just to get him, and the tractor out of the hole.
Had to look at the video a second time couldn't stop shaking my head. :duh:
 
/ Thought I seen it all! #17  
You can't fix stupid!
 
/ Thought I seen it all! #18  
but his lil ole wife is sure proud of him!
 

Marketplace Items

2023 CATERPILLAR 289D3 SKID STEER (A62129)
2023 CATERPILLAR...
7102 (A61567)
7102 (A61567)
Club Car (A59231)
Club Car (A59231)
2016 Dodge Charger Sedan (A61569)
2016 Dodge Charger...
CATERPILLAR T40D STRAIGHT MAST FORKLIFT (A62129)
CATERPILLAR T40D...
2008 Kawasaki ZX1000 Motorcycle, VIN # JKAZXCE1X8A013733 (A61165)
2008 Kawasaki...
 
Top