This is a Good Loader Operator

   / This is a Good Loader Operator #1  

Chris2520

Platinum Member
Joined
Mar 26, 2007
Messages
783
Location
Marietta GA.
Check this UTube vid out. watch this guy balance a huge rubber tire loader on the from wheels. I would say he has good hand and eye balance.
if you can do this with your john deere. you would be the man.....:D

Chris...:)

YouTube - Excavator
 
   / This is a Good Loader Operator #2  
Somehow I don't think my 2520 has the omph to get enough weight in the air to get my back off the ground......
 
   / This is a Good Loader Operator #3  
That's exactly why I have loaded tires and about 900 lbs on the 3ph... I don't want a 2 wheeler:eek:
 
   / This is a Good Loader Operator
  • Thread Starter
#4  
vintagemilano said:
Somehow I don't think my 2520 has the omph to get enough weight in the air to get my back off the ground......

Sure it does. without a balist box. its not hard at all.
though i dont recomend it.....:D I like all 4 tires on the ground my self.
but it was a cool vid. there is always people that will push the envelope.:)
 
   / This is a Good Loader Operator #6  
Chris2520 said:
Sure it does. without a balist box. its not hard at all.
though i dont recomend it.....:D I like all 4 tires on the ground my self.
but it was a cool vid. there is always people that will push the envelope.:)


All I have are weighted tires on mine and my loader will not lift something before the back gets light.
 
   / This is a Good Loader Operator #7  
Problem is, most CUT front axels aren't made for lifting the weight of the tractor, the full loader and the weighted tires. That's why weighted tires aren't as good for your tractor as weight hanging off the back is. Ballast on the 3pt transfers weight from the front axel to the back axel -- assuming your rears are still on the ground.

Weight in the rear tires just adds more weight onto the front axel when you put a heavier load in the loader (possible because of the weighted tires).

The machine shown in the video is made for that sort of thing (or it will die young).

Cliff
 
   / This is a Good Loader Operator #8  
That's amazing, but it looks like the landing would be hard on your neck.
 

Tractor & Equipment Auctions

Ingersoll Rand D1850V Air Compressor (A53316)
Ingersoll Rand...
2015 RAM 5500 Bucket Truck w/ Versalift SST40 boom -Cummins Diesel - Auto Trans- 4X4 - 72096 miles (A55302)
2015 RAM 5500...
2023 yamaha (A55758)
2023 yamaha (A55758)
2015 Ford F-550 Altec AT40M 40ft Insulated Material Handling Bucket Truck (A55788)
2015 Ford F-550...
2012 Chevrolet Traverse LTZ SUV (A53424)
2012 Chevrolet...
New Swict 84" Skidloader Material Bucket (A50775)
New Swict 84"...
 
Top