This has to be a record !!!

   / This has to be a record !!! #71  
Sadly the better products on the market today are made by Samsung or LG out of Korea, but there is all the pricing....
Replaced two refrigerators in 2018: Whirlpool for the kitchen; Samsung for the overflow. So happy we put the Whirlpool in the kitchen as it is 10 times better than the Samsung. Samsung 3-door w/bottom freezer. Ice maker capacity is about 25% pitcher. Whirlpool will fill about 3 pitchers with ice. Samsung freezer always has ice attached to the drawer. So far, Samsung shut down once for about 3 days, then started up again. No more crappy Samsung or LG (Lucky Goldstar) for us. Whirlpool is made in USA. Our Whirlpool dryer is 23 years of heavy use without a single issue.
 
   / This has to be a record !!! #72  
I would ck that statement on “made in USA”? It’s prob assembled here, but all of the parts are made in crapsville China inc. You might even want to ascertain where the raw materials originated?
Wonder if in my lifetime I'll see labels "Made in China with US components" 😂
 
   / This has to be a record !!! #73  
Can you believe it???
I had to reppalce the ice maker on my semi-high-end thermadore. I know Subzero owners who complain about having to repair their fridges too.
Marketing is the evil that makes this happen. Marketing people run all the large corporations now not the engineers who built them. Marketing tells engineering what to do. I trained engineers fresh out of school and they all told me that they were taught that in the hierarchy of the workplace marketing was above them.
Marketing tells them to make appliances that last ten years.
 
   / This has to be a record !!!
  • Thread Starter
#74  
Interesting....the 106 code in the model number on the 72 yr old freezer means it was built by Whirlpool....different times.
herring, can you pls expound on this and provide the resource you used to determine the manufacture? Thanks in advance!
 
   / This has to be a record !!! #75  
Some interesting things about Whirlpool in this Wiki article.


Whirlpool headquarters is located about 30 miles north of my in Benton Harbor, MI. When I was a kid, they had a huge factory there, now long gone and torn down. But their corporate headquarters is still there.
 
   / This has to be a record !!! #76  
They have quite the monopoly including in my kitchen.
 
   / This has to be a record !!! #77  
I replace the motor inverter board on my washer every few years. I get them on ebay now.
Seems a lot of washers use the same poorly made board.

I see on one of the online sites, that if I want to buy a case of these boards they are $6.95 each. So quality last would be my guess.

Why does a washer need a continuously variable drum rotation speed?

It looks like Samsung is going to lose the class action suit on their refrigerators. They already have thousands of people signed up for the suit.
 
   / This has to be a record !!! #78  
We bought the Top Of The Line MAYTAG "Neptune" frontload washer / dryer set about 15 years ago - large capacity, heavy duty. That was $2800.00 Cdn (ouch), but we wanted longevity and quality. Sears was always great.

we live in the country, hobby farming, and had three children in numerous sports

we thought that this was the best value for our money, but it was terrible. Within 16-18 months, both units crapped out, left all of the freshly washed clothing with a terrible stench. As though no detergent had been used, and the clothing festered in dirty water (that is exactly what happened, drainage issues). Some clothing was tossed out before we realized the problem. The items were under warranty, so we pursued that for replacements, having already paid the Maytag Repairman several service bills.

Maytag sent us their REPAIR KIT (3x) ... that was nothing more than an instruction booklet and a small bottle of liquid detergent and detergent pod package. Did absolutely nothing.

My wife, a stay-at-home mom, who was trying to manage a busy household was devastated, cried on the phone several times, while explaining our plight to the Maytag service reps.

Unsatisfied, we Eventually, were told that the ONLY option was to join a large-scope Class Action Lawsuit, that was North America Wide, with Regional settlements. We were forced to join the lawsuit OR receive nothing. The regional settlement (I think in Canada, or at least most Provinces) was that Maytag replaced our high end front load set, with their entry level regular capacity top-load units. NOT comparable at all. And we had to dispose of the original problem units ourselves. This made us angry.

By that time, MAYTAG was then / is now under the WHIRLPOOL ownership ... we will not buy from either company in the future.

There was a lot of frustration with this result, so what is a cathartic redneck solution, that would make us feel better ??? I took the ATV out, chained the units one at a time to the hitch, and drove full throttle down the paved road. Wife took first ride, washer bouncing down the country road, returning completely mangled. Then my turn with the dryer. :) That felt good. Loaded units into the truck, and delivered to the dump.

We were not happy with the replacement units either, and sold them within a year - those ones functioned fine, but were not adequate for our needs.

PS - in other news...
my parents were married in 1958, they bought a USED full sized heavy (Sears ?) Freezer. in 1988 I bought a house and inherited that Freezer. In 1996 we were married, we moved in 2001 and dragged that Freezer with us, about 600 kms. That same Freezer remains in use in our garage. it is the best appliance that we have, still running strong at more than 65 years old.
They don't make things like they used to. We don't buy products manufactured in China, because when quality is needed, we'll pay the difference.

(I feel better) :)
 
   / This has to be a record !!!
  • Thread Starter
#79  
Some interesting things about Whirlpool in this Wiki article.


Whirlpool headquarters is located about 30 miles north of my in Benton Harbor, MI. When I was a kid, they had a huge factory there, now long gone and torn down. But their corporate headquarters is still there.
They don’t make anything here.

When the raw materials are mined from China, melted down & molded in China, then stamped out in China, it’s China xxxx ! Where the parts & components are assembled is really irrelevant. It all comes down to the quality of the materials…of course they have to be assembled properly, but testing & QC are things of the past and there are no QC books or chapters in China..
 
   / This has to be a record !!! #80  
Lol did something similar to a newer pile of junk home good after ordering and replacing a few parts continuously, except it involved a steel track skid loader, a 12 gauge shot gun, a 1/2 gallon of gas and four letter words. The destruction of my headache was worth every minute.
 

Tractor & Equipment Auctions

30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
8ft. Shipping Container (A50860)
8ft. Shipping...
2023 John Deere 8R410 MFWD Tractor (A51039)
2023 John Deere...
20 ft. Shipping Container (A50860)
20 ft. Shipping...
2012 Case IH Patriot 3330 Self Propelled Sprayer (A50657)
2012 Case IH...
Payment Terms (MUST READ) (A50774)
Payment Terms...
 
Top