tractorboy5500
Gold Member
Have any pics, we like pics.
Think I need a new axle
- Thread starter MESSMAKER
- Start date
- Views: 2986
OP
MESSMAKER
Veteran Member
Sorry. I already got it on. One of the easier jobs in a while.I first removed the lug nuts. I jacked it up until the front tires came off the ground and dropped it on jack stands. I then pulled the tires. I took a grinder and a cutting wheel to the u-bolts. I removed all the old hardware and the old axle. I threaded the new axle through the springs and put the new u-bolts in place. 5 min. with an impact and I had the u-bolts on and the wheels back in place. I removed the jacks and was ready to go in less than 30 min. total.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
sweet.. good to hear.
soundguy
soundguy
