Thanks for help..JD 3320 Arrived

[sfloggie]

Thanks for everyone's help in the decision.
The 2006 (235 hrs)3320 ehydro (and extras I was not aware of) arrived for $20.5K with 300CX, 437BH, 4-1FEL and a Blade. I did not know the blade was part of the deal.
The 437 was never used nor the blade. Looks lke new except a bent area on the top of the 4-1.

The guys in the pictures delivered it, so if they owe you money know neither is me!

 

[yooper1]

Looks nice.

Now go out and get some safe seat time and dig and back hoe and blade.

Any seat time is fun time

 

[RoyJackson]

Very nice machine!! I'm sure you'llenjoy using for as long as you want!!

BTW, if you want to keep that seat looking pretty, GreenFunStore has John Deere factory seatcovers on sale for just under $25. Good quality...I just put one on my 4400's seat.

(sorry, no pics...wife has the camera and she's out of town)

 

[CinderSchnauzer]

BTW, if you want to keep that seat looking pretty, GreenFunStore has John Deere factory seatcovers on sale for just under $25. Good quality...I just put one on my 4400's seat.

Great looking tractor (bias alert). You're going to love it.

The factory seat cover LP95233 is very nice. Got one July 14. I was away for a while and came home to find a small rip in my seat - suspiciously just like someone unknown (probably Son) sat on the seat with a screwdriver in the rear pocket. New seat is + or- $400. So far the cover is also staying a lot cleaner than I first thought.

Looks like I can see the valve stems on your tires in the pics. Tires may be in the narrow position. Since you have both BH & FEL, suggest you switch them side to side to gain some extra width & stability.

If you have problems removing the BH - there have been several threads on how to adjust the rock shaft so it lifts the BH high enough. If adjusted correctly you shouldn't have to use the stabilizer arms to lift / adjust the BH for R&R

 

[sfloggie]

Will do on safety as I will read the book before I start. Then I am asking the farmers working the front portion to give me some instructions. They have been a kind group of guys.

Thanks for the seat tip as I would have not thought of protection so I will order in a moment. Roy thanks for the sale tip and CindyS thanks for the item code.

Lastly thanks CindyS for noticing the stem location as I forgot. I will check on crossing them next week.

The guy delivering the JD gave me some great tips about tipping.

Jim

 

[kennyd]

Nice! You got a great deal on that setup:thumbsup:

 

[CompactTractorFan]

Congrats!!! The 3320 is one nice machine!!! :thumbsup:

 

[Pushing_Tin]

Congrats and welcome to club 3320! I'm so jealous of the bh!

 

[mjncad]

I have the same rear blade as you, and I suggest you paint the parking stand yellow so it stands out as a reminder to raise it before doing any work with it.

This is what happened when I forgot to raise mine.

Deere wanted ~$40 for a replacement. For that cost, I made three and had them powder coated yellow.

 

[RoyJackson]

The factory seat cover LP95233 is very nice.

Same cover from GreenFunStore. Comes in a JD box, but you don't get the storage bag (like I'm going to remove the cover).
Called my local Deere dealer...they sell the same cover for about $50.

Anyway..back to topic!