TC45DA quick attach

[APSmulching]

I finally found a New Holland quick attach for my TC45DA loader for a good deal and now I need to convert my pin on bucket over to QA. How thick should the weld on plate be? What thickness does NH use? I was thinking about 1/4". Anyone have suggestions on where to buy a nice one? Any helpful tips would be appreciated.:thumbsup:

 

[WM75Guy]

Here is the thread where I did mine. I bought the adapter from the dealer.

http://www.tractorbynet.com/forums/...hed-16la-fel-quick-attach.html?highlight=16LA

 

[APSmulching]

My adapter is a NH part. Now I need to buy a plate to weld onto my bucket. They are available in different thicknesses. Does anyone know what NH used?

 

[WM75Guy]

I can measure mine tomorrow and let you know.

 

[Ford850]

My 6' HD bucket, and the loader QA are all 1/4" parts. The main plate welded to the bucket is 5/16" thick. There 2 small a top pieces that catch the loaded QA, on the top edge of the main plate, and those are 3/8".