Well, its time to go blue. I need to find a dealer in Texas (farm equipment state tax exclusion) nearest to Tulsa, Oklahoma that I can find a TC45D, 4WD, HST, with R4's, folding Rop, 16LA HD 72" bucket, and deluxe 3-point. So far, my best offer is $23,500 from a dealer in Springfield, MI. Can anyone give me the name or number of a dealer that might be able to give me a better price?
Price Check TC45D Price
- Thread starter kamarch
- Start date
- Views: 1052
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Washington County Tractor Inc.
1889 Hwy 290 E. & S. Market
P.O. Box 1619
Brenham, TX 77833
Washington County Tractor
Phone (979) 836-4591
Fax (979) 836-7446
Toll Free 1-800-256-5655
______________
I don't know how close these guys are, but they seem to have some decent pricing on NH...
1889 Hwy 290 E. & S. Market
P.O. Box 1619
Brenham, TX 77833
Washington County Tractor
Phone (979) 836-4591
Fax (979) 836-7446
Toll Free 1-800-256-5655
______________
I don't know how close these guys are, but they seem to have some decent pricing on NH...
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Brenham, TX is pretty far from you, so I'd try this link to New Hollands Dealer Locator.
http://www.newholland.com/dealers/cgi-bin/mqlocator.exe?link=find
If you want to drive to Texas, I can give you several dealers within 70 mi south of the state line. Good Luck. By the way, I think there are two dealers in Tulsa and I know there are several in Kansas. I guess it just depends on how far you want to drive for service.
JimI
http://www.newholland.com/dealers/cgi-bin/mqlocator.exe?link=find
If you want to drive to Texas, I can give you several dealers within 70 mi south of the state line. Good Luck. By the way, I think there are two dealers in Tulsa and I know there are several in Kansas. I guess it just depends on how far you want to drive for service.
JimI
poman
Bronze Member
I bought my TC33D from La Rue New Holland in Paris, TX and they treated me right. Talk with Royse.
Poman,
Thanks for the referral. I talked to Royce today, and it looks like I can get the TC45D, 4WD, FEL16LA HD, Folding ROPS, deluxe 3 point, R4's, with NH rebates for $21,700. That is a great price, and with no farm tax, beats anything I could get here in Tulsa. It should only cost me 2 tanks of diesel to pick it up and bring it home. It also sounded like I could add 1 HD hydraulic link and 1 remote valve for $250 more.
Have I missed anything? Does NH provide a HD grill guard for this model? Would I need one? I will also need a 72" box blade with rippers. Any suggestions on the best model on the market that would be suited for HD use with the TC45?
TIA
Thanks for the referral. I talked to Royce today, and it looks like I can get the TC45D, 4WD, FEL16LA HD, Folding ROPS, deluxe 3 point, R4's, with NH rebates for $21,700. That is a great price, and with no farm tax, beats anything I could get here in Tulsa. It should only cost me 2 tanks of diesel to pick it up and bring it home. It also sounded like I could add 1 HD hydraulic link and 1 remote valve for $250 more.
Have I missed anything? Does NH provide a HD grill guard for this model? Would I need one? I will also need a 72" box blade with rippers. Any suggestions on the best model on the market that would be suited for HD use with the TC45?
TIA
mikim
Veteran Member
That's a really good price I'm thinkin' ... I'd get the grille guard if you do the stuff I do. I run through the brush all the time and sometimes do things like yesterday - I pulled out a utility pole and when it fell the bottom swung under the fel toward the grille /w3tcompact/icons/shocked.gif--- just missed -- but I was sure hoping for a split second that the guard would take it if it hit./w3tcompact/icons/crazy.gif I have a woods box blade on my 45 but you'll hear that there are lots of good ones out there - just make sure you get a heavy one. -- and add the remote for the hyd top link at least - you won't be sorry.
mike
mike
Thanks Mikim,
Pulled out a utility pole? sounds like you need a hardtop for those days where the wind is swirling around!
I did price the added the grill gaurd to the invoice. I have priced a HD 6' boxblade, with scarifiers. I still don't really know how I will use the hydro and remote, but it is a dealer add, and it seemed like a good time to have it installed. I have also gotten the QT bucket release. The factory can install it, and it will come in handy down the road. The last thing I need is 3-point hitch that I can use to pull a spliter, boat, or small trailer. I saw one on the Kubota page, but can't seem to find one on the SSB tractor implement page.
Pulled out a utility pole? sounds like you need a hardtop for those days where the wind is swirling around!
I did price the added the grill gaurd to the invoice. I have priced a HD 6' boxblade, with scarifiers. I still don't really know how I will use the hydro and remote, but it is a dealer add, and it seemed like a good time to have it installed. I have also gotten the QT bucket release. The factory can install it, and it will come in handy down the road. The last thing I need is 3-point hitch that I can use to pull a spliter, boat, or small trailer. I saw one on the Kubota page, but can't seem to find one on the SSB tractor implement page.
mikim
Veteran Member
<font color=blue>don't really know how I will use the hydro and remote</font color=blue>
It took me almost 45 seconds to realize it's value when using the box blade - but then I'm a slow learner .../w3tcompact/icons/tongue.gif
It took me almost 45 seconds to realize it's value when using the box blade - but then I'm a slow learner .../w3tcompact/icons/tongue.gif
poman
Bronze Member
Great!! I think you will be happy with Royce and La Rue New Holland as your dealer. They really seem interested in providing the best service to their customers.
Poman
Poman