Brikman
New member
Changed out blown hydraulic steering hose. When put back together can't get no steering. Tried bleeding lines but no luck. Any ideas?
TC40 steering problem
- Thread starter Brikman
- Start date
- Views: 4896
dave1949
Super Star Member
Just the obvious maintenance checks is all that comes to mind. Is the reservoir full and have you changed the power steering filter? The service interval for my PS filter is 600 hours.
Qapla
Veteran Member
You are aware that the power steering has it's own reservoir and does not use the hydraulic system of the tractor ......
barbqranch
Silver Member
I don't know if this would help or not, but if it were mine I would jack up the front end so the wheels are off the ground (if you have a FEL, it should be able to lift the front) and run the wheel back and forth. Maybe even try to grab a front tire and turn it side to side.
