tc40 newhoalland wont start

[csmoak25]

How do you by pass the seat, the pto and brake switches. Please email me at csmoak25@yahoo with constructions lol please Got a starting issue myself. Replaced pto switch and tractor started fine for a week and now won't start. Replaced pto relay, start neutral relay and fuel cutoff relay, operator safety module!!! Tractor still won't start. I have 0.10 volts at starter solenoid. So no power is getting there

 

[TC 40 Chuck]

Sounds like you need to check battery cable connections and battery cable to frame ground first.

 

[csmoak25]

Figured it out it was the white wire furtherest the right on the back of the ignition plug. It was giving enough voltage to the starter. I spliced into that wire and tied it into the pink wire on the starter!!!!!

Somewhere it was dropping voltage along the way and I did replace the start neutral relay as part of my trouble shooting before doing this

 

[kossetx]

Howdy folks, my tc 40 won't start. It was running and I got off to chase some horses off and it died from a safety switch, but won't restart. When i move the seat switch I hear a click, same with the pto switch. I can't get the cowling off to check the fnr switch. Besides the bolt in the front, what holds it on? Btw, all fuses are fine. Thanks, mark

 

[Hieronymous]

I wonder if this could be my problem. I shall have to locate the neutral sensing switch and check.