tc35d no power after heating glow plug

[tonyiver]

Hello, need some help, I have power when I am heating up the glow plug but once I turn the key to start the tractor I hear a click and i lose all power. after a while it resets itself and it do it again and the samething happens again. check the battery voltage and I get about 12.4 volts. sounds like a relay tripping. where are the relays located? I have the same thing happen in the winter and found out it was a bad battery. the battery is oly a couple years old and I alway take the battery out for the winter. thanks for any help.

Tony,

 

[grsthegreat]

You need to do a load test on battery. I use a carnon pyle tester myself, but just take battery to napa or likewise and have it tested. 12.4 means nothing.

Another good trst is to have someone hold a tester to battery while you try turning it over.

 

[tonyiver]

You need to do a load test on battery. I use a carnon pyle tester myself, but just take battery to napa or likewise and have it tested. 12.4 means nothing.

Another good trst is to have someone hold a tester to battery while you try turning it over.

Thanks for the input, I will be getting my dads load tester. I have had the same problem with this Oem battery, it does not say new holland like the original, I asked the dealer and they said that is what they are putting in as a replacement, this is the second one I've had.

Tony