TC30 10 amp fuse

[beckelkamp]

Can anyone tell me what is all on this fuse? Fuse blows after about 30-45 minutes of brush hogging and shuts engine down and dash gauges won't come back on. I just purchased this tractor so I have no manual or diagrams. Its the fuse all the way to the right looking head on at the fusebox. I'm guessing there is a short somewhere. Appreciate if someone could help. Thank you.

 

[Rebeldad1]

Might have better luck posting on the New Holland forum. someone there may have a wiring diagram

 

[WranglerX]

After 30-45 minutes (consistently) sort of says to me fuse capacity may be a little low.... As suggested above, get owners manual, maybe previous owner replaces a 15 amp with the 10 and it just does not have the capacity.... A ammeter reading of current on circuit would be in order...

Dale

 

[beckelkamp]

Thanks!

 

[TASMAN17]

From the manual:
When looking at the fuse block on the firewall from that side of the tractor, left to right (outside position to the inside position) are #3,2,1.
#1 (inside position) 10 amp, Fuel solenoid, safety start circuit, instrument panel, gauges and indicator lights, alternator
#2 (middle) 10 amp, Headlights, tail lights, optional rear work light, turn signals
#3 (outside position) 15 amp, Hazard lights