Was doing some grass cutting and happened to notice that there is a spring that came undone down around the control rod (#1 in picture) for the 3 point hitch level control. This stuff is all down under the seat and is pretty tough to get a good look at. The one end is still attached to what looks like #7 in the picture but I have no idea what the other end attaches to. I checked all the parts diagrams on Messicks but could not find one that shows where that spring connects to. Are there any TC24DA owners that might be able to take a quick look and tell me where the other end might connect to?
TC24DA Help
- Thread starter Mark.B
- Start date
- Views: 2565
99SVT
Bronze Member
![DSCN2114[1].jpg](/forums/data/attachments/131/131358-4a3d9bf228e7f2d896ddb7a7a68ac750.jpg)
![DSCN2116[1].jpg](/forums/data/attachments/131/131367-6ee4a0496fcc13e3828e42cd0a70c49b.jpg)
![DSCN2117[1].jpg](/forums/data/attachments/131/131375-6aaacc331b890182fd266c15c9b3886a.jpg)
JSUnlimited
Platinum Member
Mark,
First of all, welcome here!
I have a complete service manual for the TC24DA. Give me some time and I'll look at it and see what you might be talking about.
First of all, welcome here!
I have a complete service manual for the TC24DA. Give me some time and I'll look at it and see what you might be talking about.
Mark
If you look straight ahead of the lever #7, towards the front of the tractor you'll see a U shaped bracket that has a couple holes in it. The spring connects to the LH hole, looking from the back end. Take a look here ...zoom in on the pic there and look at item #21
If you look straight ahead of the lever #7, towards the front of the tractor you'll see a U shaped bracket that has a couple holes in it. The spring connects to the LH hole, looking from the back end. Take a look here ...zoom in on the pic there and look at item #21
Last edited:
99SVT
Bronze Member
no, don't have any of that stuff, only thing I have is the MMM. The PTO engagement lever is on that side, along with the height controller for the 3pt & MM
JSUnlimited
Platinum Member
Mark,
Did you get things taken care of?
Did you get things taken care of?
Mega_Me,
I think I got it fixed thanks to TC Boomers reply. I connected the spring to the U shaped bracket. It just seems that the spring is a little long and just kind of hangs there loosely. Not sure what purpose it serves as it seems there is never much tension on it.
Thank you
Mark.B
I think I got it fixed thanks to TC Boomers reply. I connected the spring to the U shaped bracket. It just seems that the spring is a little long and just kind of hangs there loosely. Not sure what purpose it serves as it seems there is never much tension on it.
Thank you
Mark.B
