Tc 45 da not starting

owens123 · Jun 2, 2017

I have a 2007 tc45 da. It was running fine and then the engine stopped. The number 2 fuse was blown. I replaced the fuse and it started and ran for 10 seconds and cut off again. The fuse was blown again and it was 15 amp. I replaced fuel shut off relay number 2 and put a 20 amp fuse in the number 2 spot. It ran for 1 minute and then shut off again. This time it did not blow the fuse but will not start. It does turn over. For about a year the glow plug light on the instrument panel will stay on for about 10 minutes after starting and make a clicking noise then will go off. I would appreciate any help and advise as to what might be wrong. The tractor has 900 hours on it.

CCWKen · Jun 2, 2017

Perhaps wiring short(s) or the shut off valve is bad.

What amazes me is why people think replacing a blown fuse with a bigger fuse will fix anything. Fuses are used to protect parts and/or wiring. :thumbdown: