T4.75 glow plugs, 3 pt height

Thumper & Buttercup · Nov 2, 2018

OK TXCYCLE,

I don't have the external lift controls but they are on my wish list, it looks like #1 is a
threaded rod and #2 is a threaded fitting, I'll take a look at them and see if we can
get an adjustment on it.

Thanks

Thumper & Buttercup · Nov 9, 2018

We'll we did get a good look at the shafts, they are properly adjusted
and are traveling all the way to the stops. I am using the same quick attach
that I used on the DX60 with this same snowblower, this tractor just does
not lift the same hight at the old tractor. If I can get a top link adapter
for my cat 2 quick attach I can hook up at a lower hole on the snowblower.
I'm going to get my local guy to look at it.

It was a nice 15 degrees today and I jumped in the tractor, the glow plug worked
great so they are working fine.

Thanks guys.

Thumper & Buttercup · Nov 14, 2018

Hey Guys,

Last night Kim and I were running around and saw the new L & M Fleet Supply

in Thief River Falls, we were just looking around and found a Cat 2 Quick Hitch

with a adjustable top link. It was priced at $249.00 so we grabbed it.

With a little work and I had to change out the top hook for one we had here

(We needed a little more wiggle room for the top link to go in easy).

We went from 7" ground clearance to 14".

So our old setup