wdchyd
Elite Member
Not sure why they would leave them out other than to confuse us
Swivel Fittings
- Thread starter otlski
- Start date
- Views: 5251
OP
otlski
Gold Member
Again, thanks for all the advice. Here are the pictures. The TLB is branded as a Lodi 815 which I understand is either a clone of a Terramite or a rebadged version of the same. One cylinder had a broken cylinder eye and a ripped out mount on the same cylinder. I rewelded both. I recently switched from Mig to flux core and until now had not quite gotten the knack for it. Well with some strong light and actually wearing glasses so I could see, I think I did better than expected.
As far as the original purpose of this thread, I found the NPT swivels at a local tractor dealer at $3 per fitting. Turns out that I did not need them as both sides of all hoses (so far) had swivel fittings and none broke (so far). Though my friend gave me a slew of new hoses to replace the old ones, only a few worked out. I bought some from Discount Hydraulic Hoses custom made and hope to get them before the weekend. I'll let you know how it turns out.
As far as the original purpose of this thread, I found the NPT swivels at a local tractor dealer at $3 per fitting. Turns out that I did not need them as both sides of all hoses (so far) had swivel fittings and none broke (so far). Though my friend gave me a slew of new hoses to replace the old ones, only a few worked out. I bought some from Discount Hydraulic Hoses custom made and hope to get them before the weekend. I'll let you know how it turns out.
