andrew_long
New member
- Joined
- Aug 10, 2022
- Messages
- 2
- Tractor
- Swinger 100
Swinger 100 Wheeled Loader
- Thread starter andrew_long
- Start date
- Views: 1606
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,040
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Welcome to TBN.
OP
andrew_long
New member
- Joined
- Aug 10, 2022
- Messages
- 2
- Tractor
- Swinger 100
Mainly looking for information on the hydraulic system. There is a leak on what I think is the hydraulic return line from the cooler. The hose looks like it might have been replaced and possibly had some welding work done on the fitting that goes into the tank. Does anybody have specifications on what the original hose was?
Also looking for some information on the articulating joints in the front, it looks like the bottom one may have been replaced at some point.
Also looking for some information on the articulating joints in the front, it looks like the bottom one may have been replaced at some point.
Attachments
Hamco
New member
Contact Mike at Hummerbee aka A&O Forklift.
Swinger_Parts_4_Sale
New member
- Joined
- Feb 27, 2025
- Messages
- 14
- Tractor
- Swinger
Hello,
I stumbled onto your post about looking for swinger loader parts, if you are still needing parts feel free to send me a message, I may be able to help you. I used to work for the company that manufactured the Swinger loaders before they were discontinued and obtained a lot of the information, build sheets, material list, vendor/supplier information and lots of other stuff. I am currently in the process of having some of the more common parts & obsolete parts reproduced based off original drawings & specifications.
I stumbled onto your post about looking for swinger loader parts, if you are still needing parts feel free to send me a message, I may be able to help you. I used to work for the company that manufactured the Swinger loaders before they were discontinued and obtained a lot of the information, build sheets, material list, vendor/supplier information and lots of other stuff. I am currently in the process of having some of the more common parts & obsolete parts reproduced based off original drawings & specifications.