boomer05
New member
don't know a thing about this tractor,except mitsibishi bought them out in the mid 80's.tractor runs fine and the pto works fine,but lift won't raise.any manual's for this tractor?where is the pump for hydraulic's?:anyone:
suzue M 2000 2 cyl diesel,hyd. lift won't raise.
- Thread starter boomer05
- Start date
- Views: 1728
ltcsloandf
New member
did you receive any information
I have a suzue that has the lift arms stuck in the raised position
I have a suzue that has the lift arms stuck in the raised position
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Have you tried to adjust the knob under the seat. Sometimes called descent knob. Rate of descent knob.
This knob is designed to set the rate of drop, or lock the cyl for transporting implements.
What it does is to block the flow of fluid out of the 3pt cyl, or let the fluid out slowly.
So if the descent knob is full left and no debris in the orifice, then the fluid should flow back to tank.
You may have a mechanical problem.
This knob is designed to set the rate of drop, or lock the cyl for transporting implements.
What it does is to block the flow of fluid out of the 3pt cyl, or let the fluid out slowly.
So if the descent knob is full left and no debris in the orifice, then the fluid should flow back to tank.
You may have a mechanical problem.
