RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,902
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
Pretty sure the manual says to use GL5, something like 75-90.
Surprise 1023e owner looking for advice.
- Thread starter milkman636
- Start date
- Views: 14464
OP
milkman636
Veteran Member
- Joined
- Aug 15, 2010
- Messages
- 1,577
- Location
- Palm of the Right Hand
- Tractor
- Bobcat CT335 + John Deere 1023e (former owner of Kubota BX2370-1, John Deere 5210, and Ford 2000)
That may be a good possibility for what was in there. I'd still love to see it in print, but I just looked through the operators manual again and still don't see it listed anywhere.
Last edited:
John0829
Veteran Member
No it does not use gear oil it uses UTF. Look at this:
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,601
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
OP
milkman636
Veteran Member
- Joined
- Aug 15, 2010
- Messages
- 1,577
- Location
- Palm of the Right Hand
- Tractor
- Bobcat CT335 + John Deere 1023e (former owner of Kubota BX2370-1, John Deere 5210, and Ford 2000)
Perfect! That’s very good to see. Thank you.
John0829
Veteran Member
Gotta check the label on what you are purchasing to see if it is HyGard compatible.
OP
milkman636
Veteran Member
- Joined
- Aug 15, 2010
- Messages
- 1,577
- Location
- Palm of the Right Hand
- Tractor
- Bobcat CT335 + John Deere 1023e (former owner of Kubota BX2370-1, John Deere 5210, and Ford 2000)
It was actual John Deere HyGard. I used it on assumption from previous experience, Seeing how slowly the stuff coming out flowed in comparison with the HyGard going back in made me question that decision. I really appreciate seeing the correct oil in print from Deere. Thanks for posting that document.Gotta check the label on what you are purchasing to see if it is HyGard compatible.
John0829
Veteran Member
happy to be of service, I tend to always download ALL the manufacturer documentation I can find about any piece of equipment I own
OP
milkman636
Veteran Member
- Joined
- Aug 15, 2010
- Messages
- 1,577
- Location
- Palm of the Right Hand
- Tractor
- Bobcat CT335 + John Deere 1023e (former owner of Kubota BX2370-1, John Deere 5210, and Ford 2000)
I picked up a block heater kit and did the install this weekend. It was a surprisingly pleasant task with the bolt-on adapter that is provided. It only took about an hour to do, and having a warmer block seems to noticeably smooth out the first start on a December day.
One more question I have is about steering wheel free play. It seems that the steering wheel shaft has a little more movement in the column than I’m used too. Has anyone else experienced this on a 1023e? What was the fix for it?
One more question I have is about steering wheel free play. It seems that the steering wheel shaft has a little more movement in the column than I’m used too. Has anyone else experienced this on a 1023e? What was the fix for it?
dodge man
Super Star Member
No personal experience but I have read where people say they get a little loose from using it as a handle to pull yourself up on the tractor.