Summit 3 port mulitiplier

[fruitcakesa]

Anybody used one: https://summit-hydraulics.com/produ...ve-including-couplers-and-switch-box-control/

 

[K5lwq]

I have not used one of these but it looks like a simple diverter to me. Basically it turns one rear remote into three using the one remote valve. Then depending on which switch is on, your valve will control whatever is hooked to that section.

Looks like a nice kit.

 

[Woodstock Walt]

I agree, I've never seen one of those before. Looks like a great way to add remote ports without the hassle of an aux. OE kit. Wish I'd seen this a few months ago...

 

[jjeff]

I have the summit manual lever operated multiplier on my 4150. they sent me everything needed to make an easy install including sust caps. No complaints Works great can flip the lever from drivers seat. Did have to fabricate a place to mount it.

 

[3Lfarms]

I put the four port version on my tractor. It works great for my six way blade. I run my top link on a factory remote and the three blade functions on the multiplier.

 

[Zeppelin]

I have one on my 3510, works great and fits pretty well in the place of the tiny toolbox. I choose the version with the 3 way switch since I had a blank in the cab next to the levers. Now I can keep my hydraulic top link on with the flail that requires 2pairs.

 

[Gale Hawkins]

I looked at this and was impressed but for our 1966 Ford 3000 I went ahead and bought a used dual remote control just that part alone was $1,000 before all the plumbing because I wanted to keep it OEM look for the OEM Ford one arm front end loader.