SubSoiler stand

[bigtiller]

I had no good way of parking my subsoiler other than just laying it on the floor, and it was often in the way. So I made a rolling stand.

I had some secondhand 2.5 inch castor wheels that I welded on and a short backer plate so I wouldn't set it to far back and miss the uprights when setting it down. All the steel is 3/16 x 1.25 x 1.75 inch ~ ...

It was a good way to kill an afternoon doing some fun metal work.

 

[dlctcg]

Nice... I need to put this on my To Do (someday) List...

 

[i7win7]

Don't know if steel is cheaper than wood yet

I have other stands in this post

Ideas to make implements QH compatible

Get the most benefit from your quick hitch. Buying new get QH compatible. Here is a photo of an implement whose manufacturer has their act together. Note how it's designed for cat 1 & 2. Also the lift arm spacing can be adjusted. Some "QH compatible" only need minor modification. This TSC...

www.orangetractortalks.com

 

[bigtiller]

Don't know if steel is cheaper than wood yet

I have other stands in this post

Ideas to make implements QH compatible

Get the most benefit from your quick hitch. Buying new get QH compatible. Here is a photo of an implement whose manufacturer has their act together. Note how it's designed for cat 1 & 2. Also the lift arm spacing can be adjusted. Some "QH compatible" only need minor modification. This TSC...

www.orangetractortalks.com

That's a nice looking one too.

The steel I used for this project was definitely cheaper than todays wood prices. I bought about a ton of scrap steel at a silent auction for $180 in 1990.