Hay Dude
Epic Contributor
- Joined
- Aug 28, 2012
- Messages
- 26,171
- Location
- The Last Red State in the Northeast
- Tractor
- Challenger MT655E, Massey Ferguson 7495, Challenger MT555D, Challenger MT535B Krone 4x4 XC baler, 2-Kubota ZD1211’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mower, NH wheel rak
One of my 3 stucco walls failed moisture probe tests on 6 of 8 windows on my east wall on March-22. Weather was good for testing. Walls were dry. Weather was fair.
Anything above 20% is “red/danger” zone. 15%-19% is yellow “caution”. Under 15% is green “satisfactory”
West wall tested fine all green 10-15% (driveway end)
North wall tested fine all green 10-15% (back of house)
East wall has readings from 19%-26% (other end)
So my east wall barely failed. I took my Delmhorst 2-prong wood moisture tester and probed the same holes he drilled & caulked and they read 12-15% which is consistent with my North & West walls.
Is my Delmhorst wood moisture tester going to work the same as his $600 high-tech 2-prong stucco testing meter?
Anything above 20% is “red/danger” zone. 15%-19% is yellow “caution”. Under 15% is green “satisfactory”
West wall tested fine all green 10-15% (driveway end)
North wall tested fine all green 10-15% (back of house)
East wall has readings from 19%-26% (other end)
So my east wall barely failed. I took my Delmhorst 2-prong wood moisture tester and probed the same holes he drilled & caulked and they read 12-15% which is consistent with my North & West walls.
Is my Delmhorst wood moisture tester going to work the same as his $600 high-tech 2-prong stucco testing meter?
