W
washita
Guest
well.... at 330 hours now I am pursuing an unusual vibration when accelerating motor to full throttle, never encountered this before. motor mounts are tight (first thing I checked) lovejoy couplers?
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 65,696
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Does it only happen when the PTO is engaged and a mower deck is installed?
OP
washita
Guest
no attachments are on the PT except for the pallet forks and the vibration occurs while parked
woodlandfarms
Super Member
- Joined
- Jul 31, 2006
- Messages
- 6,149
- Location
- Los Angeles / SW Washington
- Tractor
- PowerTrac 1850, Kubota RTV x900
So, if you were to relieve the pressure on the PTO Pump, put a coupler across it, does it change the vibration? I guess I am getting at is how you get to wether it is like on a car... if you feel the issue under acceleration it is engine or tranny, and if you feel it under coast it is the wheels. Wondering if you can free-wheel your pumps, and see if the vibration continues. I would assume, probably incorrectly, that a pump with no load would have less chance of vibration than one under load.
OP
washita
Guest
my neighbor feels that the vibration is a transition problem between low idle circuit jets to high flow jets in the carburetor, if I have time this weekend the pumps will be disconnected from the motor and motor ran to check for harsh vibrations through rpm range, if problem surfaces it will warrant a carb. rebuild
