skytime24
Bronze Member
- Joined
- Oct 23, 2013
- Messages
- 53
- Location
- clarkesville georgia
- Tractor
- LS G3038, stihl fs90, stihl ms290, snapper riding mower, Honda gcv160, Yamaha g9 golf cart
So I'm not a mechanic but the other day I bent the bar on my Walmart saw I've had for a while. I needed a saw and had my grandfathers ms 290 which has been sitting for 4 years.
Well my cousin was supposed to help me fix it today well I couldn't get in touch with him so it took the carberater off and took it apart it was gummed up and had dirt in the Air holes so i blew it out let it soak in gas and carb clean for an hour while I cleaned up the saw and sharpened my chains.
Put it back together and some fresh gas.
It runs like a champ now.
Nothing like fixing something your self and saving 60 bucks.
Well my cousin was supposed to help me fix it today well I couldn't get in touch with him so it took the carberater off and took it apart it was gummed up and had dirt in the Air holes so i blew it out let it soak in gas and carb clean for an hour while I cleaned up the saw and sharpened my chains.
Put it back together and some fresh gas.
It runs like a champ now.
Nothing like fixing something your self and saving 60 bucks.