Stanley pole tamper Model TA 54103

[North Georgia]

Just bought a Stanley pole tamper which requires 4-9 GPM fluid with 8 GPM being optimum. Plan to set utility poles for pasture. Am going to use this on a M5400 Kubota which produces 11.6 GPM. Would there be a problem here ? Don't want to blow seals.
Thanks

 

[J_J]

Just run the tractor at a lower rpm.

Check the pressure , and see if it is an open center.

Pressure 1000-2000 psi 70-140 bar
Flow Range 7-9 gpm 26-34 lpm
Optimum Flow 8 gpm 30 lpm

Add a relief valve to the circuit.