Hello everyone I own a LS J2020H from new and has been a decent little tractor. Today I started it and when I went to move it killed the engine . I tried in neutral 2 wheel drive anything I could think of. the loader and 3 point hitch work fine. does anyone on here know the fix or has had the same issue. Thanks in advance Rollie
STALLING
- Thread starter rollie13
- Start date
- Views: 2168
RjCorazza
Elite Member
Sounds like a safety interlock switch problem. Your manual may have a set procedure to test each switch. If it shuts down when you press the hst pedal, I would suspect a defective seat switch (operator presence).
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Check all of the safety interlock switches. There is a seat switch, PTO switch, hydro pedal switch, brake switch. If you started moving, my bet would be the seat switch. My MT125 did the same to me , it was the seat switch.
Bobrown14
Gold Member
Flop down hard on the seat. My bet is the seat switch. Can loosen the dial on the front of the seat so you're getting better contact with the seat safety switch. Its common.... the seat adjusted for a heavier person and then the seat contact switch doesn't engage. Eat more pizza.
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
No adjustable suspension seat on the XJ 2020.....
