Spreading powdered lime?

/ Spreading powdered lime? #11  
It looks like a classic spreader. I would enjoy more pictures of it if you have them.
 
/ Spreading powdered lime?
  • Thread Starter
#12  
Here is a gallery of some more.
Drop spreader - Google Photos

The red machine is the Czech Vari two wheel tractor. Because converting the green Goldoni to be a rotary plow from being a powered trailer takes so long, and I had to use it to plant the potatoes, I struggled around the field pulling the spreader with the Vari, just standing on the board on the spreader. Otherwise, I hitch it to the back of the Goldoni trailer-- I added a tow-ball there. The tow ball is also great with hauling hay-- I can attach my cars trailer and haul twice so much.
 
/ Spreading powdered lime? #13  
Found this thread when I searched lime spreading. How many hectare did you cover? I have about 8 hectare to cover. I live about 200 km from the nearest lime supplier. I have been trying to figure out how to spread the lime and saw your post. I remember seeing a drop spreader on one of our farms that I might be able to make work. It will look funny behind the tractor I would use - 170 HP MFWD - but it might do the job.
 
/ Spreading powdered lime? #14  
Spreading powered lime is a chore without the proper equipment. We did 20 ac a few years ago from a wagon pulled very slowly through the field and a couple of high school football players shoveling it out one scoop at a time. We never saw the football players again. They may still be in rehab. 3 pt hitch fertilizer spreaders will usually clog in about 15 seconds. Ask me how I know that.
 
/ Spreading powdered lime?
  • Thread Starter
#15  
I spread 2 hectares of a pelletized fertilizer that contained both lime and some trace minerals I needed. I only got about 1/3 hectare of the powdered lime done, because I was mixing in sulfur and some other trace minerals, and by hand with a shovel, then rolling a barrel to mix, then injuring my back to pour into the spreader. The spreader I have has steel wheels, so speed is definitely limited. I wish I could tell you how much, but I just can't remember.

I would say its doable, especially if one of the tractors you have listed has a front end loader to get the lime in to the spreader.

I didn't get it finished, because we went in September to the US, and despite covering the lime with a plastic sheet on top, it wasn't covered on the bottom and by spring had soaked up water from the ground, making it not a powder. Now that I have a 4 wheel tractor with FEL, I'm up for buying more lime and trying again.

One other thing, depending on your field (I'm assuming a pasture?), you could potentially pull the spreader with a 4 wheeler or pickup truck instead of the tractor, to save fuel and lessen compaction. I was pulling the 2 meter wide spreader I have with a Goldoni two wheel tractor with PTO trailer, it has a total of 12 HP.
 

Marketplace Items

9ft. Flatbed Truck Body with Gooseneck Connection (A59230)
9ft. Flatbed Truck...
(INOP) 1996 CASE 580L BACKHOE (A59823)
(INOP) 1996 CASE...
2003 International 9200I (A53317)
2003 International...
1983 INTERNATIONAL S SERIES WATER TRUCK (A57192)
1983 INTERNATIONAL...
2012 Ford F-350 4x4 Ext. Cab Pickup Truck (A59230)
2012 Ford F-350...
SKIDDED PLAIN/WASTE WATER TANK (A60736)
SKIDDED...
 
Top