Toplink Speeco Toplink experiences

[Scooby074]

Thanks for the offer!
I admit, I do use my tractor to its limits. Im not really upset that the Kubota unit bent.

Using the BB, you have to make somewhat frequent angle changes, and the Kubota unit is hard to adjust in that there is no handle, so you have to use a screwdriver or whatever is handy in the metal loop.

Its hard to adjust mostly because of the bend in the threaded section. Its hard, but not impossible.

Ideally, hydraulic is the answer and It will happen.. just not sure when because Im looking at over $400, probably $500 to get the top link and valve setup.

 

[jeff9366]

You may wish to consider a Hydralink, which has some shock absorbing ability.

I purchased a Category 1 Hydraulink recently to use in conjunction with my Bush Hog Rollover Box Blade. [Purchased via eBay.]

Have not installed it yet as I have a limb backlog to deal with using my Wallensteim PTO Chipper.

Should have the Box Blade on the 3-Pt with the Hydrulink installed within 10 days to 2 weeks.

I will report on TBN how this combination works for me.

Link + VIDEOS

HydrauLink - a self-contained air over hydraulic top link